I followed the same steps and its working too. But this i want in wireless config file, Because i dont want every time to add using GUI. So When i connect to another router also, no need to add one more. I mean to say it should be in default wireless config file.
On Mon, Aug 10, 2015 at 6:18 PM, David Lang <[email protected]> wrote: > On Mon, 10 Aug 2015, John kerry wrote: > > Date: Mon, 10 Aug 2015 18:10:14 +0800 >> From: John kerry <[email protected]> >> To: Alex Weedy <[email protected]>, >> OpenWrt Development List <[email protected]> >> Subject: [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple >> Wi-Fi >> client/AP interfaces on one radio) >> >> Firstly i configure wireless config as below: >> >> config wifi-device 'wifi0' >> option type 'qcawifi' >> option macaddr '00:01:11:00:01:00' >> option hwmode '11ng' >> option txpower '17' >> option htmode 'HT20' >> option disabled '0' >> option channel '1' >> >> config wifi-iface >> option device 'wifi0' >> option mode 'ap' >> option ssid 'Testing_ap' >> option network 'lan' >> option encryption 'psk2' >> option key 'Testing_ap' >> >> so its SSID was showing and able to connect any device to it. >> >> Then i scan the device and connect to one of it. While joining the network >> i selected Client(WDS) then the wireless config becomes like below: >> > > why don't you try following the steps in the video that you posted. > > first connect as a client, then add an additional interface and make the > second interface the AP for things to connect to. > > the order may make a difference. > > David Lang > > > config wifi-device 'wifi0' >> option type 'qcawifi' >> option macaddr '00:01:11:00:01:00' >> option hwmode '11ng' >> option txpower '17' >> option htmode 'HT20' >> option disabled '0' >> option channel '1' >> >> config wifi-iface >> option network 'wwan' >> option ssid 'D_Link_Router' >> option encryption 'psk2' >> option device 'wifi0' >> option mode 'sta' >> option key 'Dlink_Router' >> option wds '1' >> >> Then i added one as shown in the video. Now its connected to router also >> and this add one also showing so i can connect to this also. >> >> But i am not getting how to keep this in default wireless config. >> >> Because every time we cant add one to configure like this. It should be >> like default should be in ap mode so any device we can connect, if its >> connected to another router also that SSID still should be visible and >> able >> to connect to this. >> > > > >> On Mon, Aug 10, 2015 at 2:57 PM, John kerry <[email protected]> wrote: >> >> When i try to configure based on video, its shows 2 one as client another >>> one as Master but i am not able to enable it . I mean to say wireless >>> becomes disable. If i enable it using GUI also its not happening. >>> >>> On Mon, Aug 10, 2015 at 2:55 PM, David Lang <[email protected]> wrote: >>> >>> What happens when you try to follow the video? >>>> >>>> Based on your comments, i'm guessing that things don't work when you try >>>> and configure the second network and have it with a different SSID than >>>> the >>>> first network that you put in client mode. >>>> >>>> Is this correct? >>>> >>>> David Lang >>>> >>>> On Mon, 10 Aug 2015, John kerry wrote: >>>> >>>> Yes, When i am connecting to Another router its changed to Client mode. >>>> >>>>> >>>>> Can i configure this in repeater mode like its shows in below link: >>>>> >>>>> https://www.youtube.com/watch?v=3rbsh2zxPnk >>>>> >>>>> >>>> >>> > _______________________________________________ > openwrt-devel mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > >
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
