[OpenWrt-Devel] [PATCH] ramips: fix port setup for Ubiquiti EdgeRouter X (and SFP)

[Adrian Schmutzler]

The EdgeRouter only has LAN ports labelled eth0 to eth4 (plus
unsupported eth5 for SFP version). Thus, there is no reason to set
up one of them as WAN.

This patch sets all ports to "lan" and removes the unused wan_mac.

Actually, stock firmware on the EdgeRouter X assigns a specific MAC
address to each port:

eth0    *:f4 (label)
eth1    *:f5
eth2    *:f6
eth3    *:f7
eth4    *:f8
switch0 *:f9

(No data for SFP version)

Only the label MAC is stored on flash in factory 0x22.

OpenWrt currently sets &ethernet to this address, so all ports will
use that one in OpenWrt.

Signed-off-by: Adrian Schmutzler <freif...@adrianschmutzler.de>
---
 .../ramips/mt7621/base-files/etc/board.d/02_network   | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network 
b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
index 5c6b5659cb..6dfe24e296 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
@@ -62,8 +62,6 @@ ramips_setup_interfaces()
        asus,rt-ac85p|\
        iptime,a6ns-m|\
        mikrotik,rb750gr3|\
-       ubiquiti,edgerouterx|\
-       ubiquiti,edgerouterx-sfp|\
        youhua,wr1200js)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
@@ -124,6 +122,11 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0:lan" "6@eth0"
                ;;
+       ubiquiti,edgerouterx|\
+       ubiquiti,edgerouterx-sfp)
+               ucidef_add_switch "switch0" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
+               ;;
        xiaomi,mir3g)
                ucidef_add_switch "switch0" \
                        "2:lan:2" "3:lan:1" "1:wan" "6t@eth0"
@@ -246,10 +249,6 @@ ramips_setup_macs()
        telco-electronics,x1)
                wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0xe006)" 1)
                ;;
-       ubiquiti,edgerouterx|\
-       ubiquiti,edgerouterx-sfp)
-               wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x22)" 1)
-               ;;
        wevo,11acnas|\
        wevo,w2914ns-v2|\
        zio,freezio)
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel