On 12/16/19 1:31 PM, Adrian Schmutzler wrote: > The EdgeRouter only has LAN ports labelled eth0 to eth4 (plus > unsupported eth5 for SFP version). Thus, there is no reason to set > up one of them as WAN. > > This patch sets all ports to "lan" and removes the unused wan_mac. > > Actually, stock firmware on the EdgeRouter X assigns a specific MAC > address to each port: > > eth0 *:f4 (label) > eth1 *:f5 > eth2 *:f6 > eth3 *:f7 > eth4 *:f8 > switch0 *:f9 > > (No data for SFP version) > > Only the label MAC is stored on flash in factory 0x22. > > OpenWrt currently sets ðernet to this address, so all ports will > use that one in OpenWrt. > > Signed-off-by: Adrian Schmutzler <freif...@adrianschmutzler.de>
Having a WAN port by default is extremely useful (and necessary for easy automatic configuration by OpenWrt-based frameworks like Gluon without having to special-case many devices). I would prefer if we could always make one port WAN as long as we have at least two independently configurable ports, regardless of labeling - at least that was my policy for creating new hardware support in the past. Regards, Matthias > --- > .../ramips/mt7621/base-files/etc/board.d/02_network | 11 +++++------ > 1 file changed, 5 insertions(+), 6 deletions(-) > > diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network > b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network > index 5c6b5659cb..6dfe24e296 100755 > --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network > +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network > @@ -62,8 +62,6 @@ ramips_setup_interfaces() > asus,rt-ac85p|\ > iptime,a6ns-m|\ > mikrotik,rb750gr3|\ > - ubiquiti,edgerouterx|\ > - ubiquiti,edgerouterx-sfp|\ > youhua,wr1200js) > ucidef_add_switch "switch0" \ > "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" > @@ -124,6 +122,11 @@ ramips_setup_interfaces() > ucidef_add_switch "switch0" \ > "0:lan" "6@eth0" > ;; > + ubiquiti,edgerouterx|\ > + ubiquiti,edgerouterx-sfp) > + ucidef_add_switch "switch0" \ > + "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0" > + ;; > xiaomi,mir3g) > ucidef_add_switch "switch0" \ > "2:lan:2" "3:lan:1" "1:wan" "6t@eth0" > @@ -246,10 +249,6 @@ ramips_setup_macs() > telco-electronics,x1) > wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0xe006)" 1) > ;; > - ubiquiti,edgerouterx|\ > - ubiquiti,edgerouterx-sfp) > - wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x22)" 1) > - ;; > wevo,11acnas|\ > wevo,w2914ns-v2|\ > zio,freezio) >
signature.asc
Description: OpenPGP digital signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
