#16589: ATH10k for Tp-Link Archer C7 V2
-----------------------------+----------------------------------
Reporter: optimizerapp@… | Owner: kaloz
Type: defect | Status: reopened
Priority: normal | Milestone: Chaos Calmer (trunk)
Component: packages | Version: Trunk
Resolution: | Keywords:
-----------------------------+----------------------------------
Comment (by krikkit):
i have CHAOS CALMER (Bleeding Edge, r44541) (dated 26 Feb.2015) running
and i also get this errors...
{{{
[ 14.110000] ath10k_pci 0000:01:00.0: pci irq legacy interrupts 0
irq_mode 0 reset_mode 0
[ 14.460000] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k
/cal-pci-0000:01:00.0.bin failed with error -2
[ 14.470000] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 14.520000] firmware ath10k!cal-pci-0000:01:00.0.bin:
firmware_loading_store: map pages failed
[ 15.040000] ath10k_pci 0000:01:00.0: otp stream is empty, using
board.bin contents
[ 16.490000] ath10k_pci 0000:01:00.0: qca988x hw2.0 (0x4100016c,
0x043202ff) fw 10.2-00082-4-2 api 3 htt 2.1 wmi 65.109.0.0 cal otp
[ 16.500000] ath10k_pci 0000:01:00.0: debug 0 debugfs 1 tracing 0 dfs 1
testmode 1
[ 27.060000] ath10k_pci 0000:01:00.0: otp stream is empty, using
board.bin contents
}}}
BUT my 5 ghz wlan works... and i get about 400 Mbit/sec transfer (directly
next to the router) on a quick windows fileshare copying, so this is not
so bad, and its working with the firmware which comes with that snapshot
{{{
root@OpenWrt:/# md5sum /lib/firmware/ath10k/QCA988X/hw2.0/*
f3c8843f92aee286aa1b22e55c2e7374
/lib/firmware/ath10k/QCA988X/hw2.0/board.bin
5163aa8de591f80b06c77f22e9777473
/lib/firmware/ath10k/QCA988X/hw2.0/firmware-3.bin
}}}
but i am only an advanced user, not a developer :)
--
Ticket URL: <https://dev.openwrt.org/ticket/16589#comment:103>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
