#19085: nanostation m5 loco xw "loses" interface
------------------------+------------------------
Reporter: anonymous | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone:
Component: kernel | Version: Trunk
Resolution: | Keywords:
------------------------+------------------------
Comment (by bmoffitt@…):
Apologies - I should have explained more thoroughly. My testing setup
comprises two LOCO M5 XW radios. One is configured as an Access Point
(normal config except with strict WPA2 auth/encryption and 10 MHz channel
width) connected to a router on its eth0 port. The second is configured as
an Client device using relayd to make it "transparent." The client is
connected to a laptop on its eth0 port, and, of course, the LOCOS are
connected together on their wlan0 ports.
I re-tested another radio (to rule out a hardware problem on the radio)
last night running OpenWRT r45845, kernel 3.18.14 and can verify that the
LOCO did again lose contact with the router on its eth0 port last night,
so the bug seems to remain.
--
Ticket URL: <https://dev.openwrt.org/ticket/19085#comment:28>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
