#20409: uboot-lantiq: Arcadyan VGV7510KW22 brn-boot V1.08.01 does not work
--------------------------+----------------------------------
Reporter: cmoegele | Owner: developers
Type: defect | Status: new
Priority: normal | Milestone: Chaos Calmer (trunk)
Component: base system | Version: Trunk
Resolution: | Keywords:
--------------------------+----------------------------------
Comment (by mkresin):
Replying to [comment:15 anonymous]:
> your right its not booting because of missing nor image. But uboot
Problem is missing correct phy drivers (phy not found) so Tftpboot not
working,....
Well, have you ever tried do a ftpboot? The phy drivers are loaded
correctly as indicated by the {{{ltq-eth}}} line in:
>{{{
>Net: Loading gphy_phy22f_a2x firmware
>Phy not found
>ltq-eth
>}}}
According to Martin Blumenstingl (who is anonymous here) is the {{{Phy not
found}}} message related to a IC+ IP101A, which is soldered on the board
but only connected to the CPU.
Bottom line: I do get exactly the same output on my Lantiq VRX288 v1.2
based 6481 and tftpboot works fine. But in my case u-boot is still started
via brnboot. So it's not yet exactly the same configuration.
--
Ticket URL: <https://dev.openwrt.org/ticket/20409#comment:16>
OpenWrt <http://openwrt.org>
Opensource Wireless Router Technology
_______________________________________________
openwrt-tickets mailing list
[email protected]
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-tickets
