On Sun, Jan 29, 2012 at 4:27 PM, Harry Putnam <[email protected]> wrote: > Jo-Philipp Wich <[email protected]> writes: > >> Yes, assign a different LAN subnet (e.g. 192.168.2.1/255.255.255.0) to >> the LAN and connect the WAN port to one of your existing routers LAN >> ports. >> >> You may also want to open one or more ports on the WAN firewall >> side to be able to reach your 1043ND from within your existing >> 192.168.1.1/255.255.255.0 subnet. > > OK, I've set the first part.. the wan port IP/Netmask/Gateway > > Like > > uci set network.wan.proto=static > uci set network.wan.proto.ipaddr=192.168.1.50 > uci set network.wan.proto.netmask=255.255.255.0 > uci set network.wan.proto.gateway=192.168.1.1 (<== existing router) > uci set commit > /etc/init.d/network restart > > Hardwired the wr1043 to a cisco-linksys-120N > > But can no longer reach the WR1043 > > Ping 192.168.1.50 unreachable... and of course I can no longer > contact it at all. YIKES > > I think setting static may have been a mistake. However I tried to > account for it by reserving the MAC of WR1043 as 192.168.1.50 on the > cisco. > > But it appears not to be working.. Or I've boneheaded something. > > Maybe I should have left the WR1043 default of dhcp alone? > > Anyway, how can I access the darn thing now?
Connect the WR1043 directly to your PC, give to your PC an address in range # ip l set eth0 up # ip a add 192.168.1.51/24 dev eth0 You are done. Go with ssh. _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
