Harry Putnam <[email protected]> writes:
> Jo-Philipp Wich <[email protected]> writes:
>
>>>> Yes, assign a different LAN subnet (e.g. 192.168.2.1/255.255.255.0) to
>>>> the LAN and connect the WAN port to one of your existing routers LAN
>>>> ports.
>>>>
>>>> You may also want to open one or more ports on the WAN firewall
>>>> side to be able to reach your 1043ND from within your existing
>>>> 192.168.1.1/255.255.255.0 subnet.
>>>
>>> OK, I've set the first part.. the wan port IP/Netmask/Gateway
>>>
>>> Like
>>>
>>> uci set network.wan.proto=static
>>> uci set network.wan.proto.ipaddr=192.168.1.50
>>> uci set network.wan.proto.netmask=255.255.255.0
>>> uci set network.wan.proto.gateway=192.168.1.1 (<== existing router)
>>> uci set commit
>>> /etc/init.d/network restart
>>>
>>
>> Great, so you produced a subnet collision now, both LAN and WAN are now
>> using the same ranges, thats *exactly* why I said to change the LAN IP
>> above.
>
> I did mention that I am a bit denser than most...
>
> All good now.
Egad... such spelling and typing ...
> wan port is getting an address from lan router dhcp server.
> lan prot is getting the different subnet 182.168.2.0/24
^^^^ ^^^
port 192
_______________________________________________
openwrt-users mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-users
