Hi Aitor, it depends on what type of mesh network you want to build. ieee80211s is not supported by kmod-brcm-wl, but other types could work.
b43 should also support your device, your problem with b43 seams to be a bug in ssb or b43. Could you please post the output of dmesg when using b43 and not brcm-wl. Hauke On 10/21/2012 12:56 PM, Aitor Cuartango wrote: > To work is necesary install: > opkg install wlc kmod-brcm-wl > > and i removed b43 driver: > opkg remobe kmod-b43 > > One question, is possible get running with this wifi card a MESH network? > kmod-brcm-wl - 3.3.8+5.10.56.27.3-4 - This package contains the > proprietary wireless driver for the Broadcom BCM43xx chipset. > > In the package description says that is a propietary driver... and i > have painful experiences with propietary drivers... > > Thanks! > > > 2012/10/18 Aitor Cuartango <[email protected]>: >> Thanks Hauke, >> It works with last you said driver "kmod-brcm-wl" . Here the interface: >> >> wl0 IEEE 802.11abgn ESSID:"" >> Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated >> Bit Rate:44 Mb/s Tx-Power:32 dBm >> RTS thr:off Fragment thr:off >> Power Management:off >> Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm >> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >> Tx excessive retries:0 Invalid misc:0 Missed beacon:0 >> >> >> I have tried with "kmod-b43" and i cannot view the wireless interface, >> and i don't locate a module with the words "ssb", could anyone say >> witch is exactly the module name of this driver? >> >> thanks so much, >> aitor >> >> >> >> 2012/10/15 Aitor Cuartango <[email protected]>: >>> Thank you very much ! >>> i'll test it and i'll reply again this message to confirm it. >>> >>> best regards, >>> aitor >>> >>> 2012/10/14 Hauke Mehrtens <[email protected]>: >>>> On 10/13/2012 09:24 AM, Aitor Cuartango wrote: >>>>> Hi all, >>>>> do anyone have experience with Broadcom BCM43222? Is very cheap in >>>>> eBay and i have buy one to have a B/G/N network working in my old >>>>> router. >>>>> >>>>> I have installed in my Asus WL-500g Premium flased with Attitude >>>>> Adjustment (12.09-beta), but i cannot locate the apropiate driver to >>>>> get it working... >>>>> >>>>> Do anyone have experience with this card? >>>>> >>>>> thanks! >>>>> aitor >>>> >>>> BCM43222 is supported by ssb and b43 and should work in OpenWrt >>>> 12.09-beta with 11g rates in 2.4 GHz band, it could also work with >>>> broadcom-wl. >>>> >>>> Hauke _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
