More info: lsmod: root@ASUSwl500gp:~# lsmod Module Size Used by Tainted: G nf_nat_irc 848 0 nf_conntrack_irc 2512 1 nf_nat_irc nf_nat_ftp 1008 0 nf_conntrack_ftp 4544 1 nf_nat_ftp ipt_MASQUERADE 976 1 iptable_nat 2560 1 nf_nat 11264 4 nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,iptable_nat pppoe 8816 0 xt_conntrack 2128 3 xt_CT 1568 0 xt_NOTRACK 576 0 iptable_raw 560 1 xt_state 608 0 nf_conntrack_ipv4 4528 6 iptable_nat,nf_nat nf_defrag_ipv4 624 1 nf_conntrack_ipv4 nf_conntrack 42704 12 nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,ipt_MASQUERADE,iptable_nat,nf_nat,xt_conntrack,xt_CT,xt_NOTRACK,xt_state,nf_conntrack_ipv4 pppox 1152 1 pppoe ipt_REJECT 1744 2 xt_TCPMSS 2640 1 ipt_LOG 6432 0 xt_comment 400 0 xt_multiport 1136 0 xt_mac 528 0 xt_limit 1040 1 iptable_mangle 816 1 iptable_filter 592 1 ip_tables 8896 4 iptable_nat,iptable_raw,iptable_mangle,iptable_filter xt_tcpudp 1664 4 x_tables 9936 18 ipt_MASQUERADE,iptable_nat,xt_conntrack,xt_CT,xt_NOTRACK,iptable_raw,xt_state,ipt_REJECT,xt_TCPMSS,ipt_LOG,xt_comment,xt_multiport,xt_mac,xt_limit,iptable_mangle,iptable_filter,ip_tables,xt_tcpudp ppp_async 8128 0 ppp_generic 20368 3 pppoe,pppox,ppp_async slhc 4736 1 ppp_generic b43 292544 0 mac80211 267232 1 b43 crc_ccitt 944 1 ppp_async cfg80211 153952 2 b43,mac80211 compat 3376 3 b43,mac80211,cfg80211 arc4 768 0 aes_generic 30592 0 crypto_algapi 9408 2 arc4,aes_generic switch_robo 3568 0 switch_core 4624 1 switch_robo diag 7584 0
thanks! 2012/10/21 Aitor Cuartango <[email protected]> > I have deleted both: > wlc > kmod-brcm-wl > > now i install b43 > opkg install kmod-b43 > > Now i do a reboot. > And now i make a dmesg: > > # dmesg > > [ 0.000000] Linux version 3.3.8 (blogic@Debian-60-squeeze-64-minimal) > (gcc version 4.6.3 20120201 (prerelease > ) (Linaro GCC 4.6-2012.02) ) #3 Mon Sep 3 16:16:20 UTC 2012 > [ 0.000000] CPU revision is: 00029006 (Broadcom BMIPS3300) > *[ 0.000000] bcm47xx: using ssb bus > [ 0.000000] ssb: Found chip with id 0x4704, rev 0x09 and package 0x00 > [ 0.000000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x03, vendor > 0x4243) > [ 0.000000] ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x06, > vendor 0x4243) > [ 0.000000] ssb: Core 2 found: Fast Ethernet (cc 0x806, rev 0x06, > vendor 0x4243) > [ 0.000000] ssb: Core 3 found: USB 1.1 Hostdev (cc 0x808, rev 0x03, > vendor 0x4243) > [ 0.000000] ssb: Core 4 found: PCI (cc 0x804, rev 0x08, vendor 0x4243) > [ 0.000000] ssb: Core 5 found: MIPS 3302 (cc 0x816, rev 0x03, vendor > 0x4243) > [ 0.000000] ssb: Core 6 found: V90 (cc 0x807, rev 0x02, vendor 0x4243) > [ 0.000000] ssb: Core 7 found: IPSEC (cc 0x80B, rev 0x00, vendor 0x4243) > [ 0.000000] ssb: Core 8 found: MEMC SDRAM (cc 0x80F, rev 0x02, vendor > 0x4243) > [ 0.000000] ssb: chipcommon status is 0x0 > [ 0.000000] ssb: Initializing MIPS core... > [ 0.000000] ssb: set_irq: core 0x0806, irq 4 => 4 > [ 0.000000] ssb: set_irq: core 0x0806, irq 5 => 5 > [ 0.000000] ssb: set_irq: core 0x0808, irq 6 => 2 > [ 0.000000] ssb: set_irq: core 0x0804, irq 2 => 6 > [ 0.000000] ssb: after irq reconfiguration > [ 0.000000] ssb: core 0x0800, irq : 2(S) 3* 4 5 6 D I > [ 0.000000] ssb: core 0x0806, irq : 2(S) 3 4* 5 6 D I > [ 0.000000] ssb: core 0x0806, irq : 2(S) 3 4 5* 6 D I > [ 0.000000] ssb: core 0x0808, irq : 2(S)* 3 4 5 6 D I > [ 0.000000] ssb: core 0x0804, irq : 2(S) 3 4 5 6* D I > [ 0.000000] ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I > [ 0.000000] ssb: core 0x0807, irq : 2(S)* 3 4 5 6 D I > [ 0.000000] ssb: core 0x080b, irq : 2(S)* 3 4 5 6 D I > [ 0.000000] ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I* > *[ 0.000000] found parallel flash. > [ 0.000000] Unsupported SPROM revision 0 detected. Will extract v1 > *[ 0.000000] ssb: Sonics Silicon Backplane found at address 0x18000000 > *[ 0.000000] Serial init done. > [ 0.000000] gpiochip_add: registered GPIOs 0 to 15 on device: bcm47xx > [ 0.000000] Determined physical RAM map: > [ 0.000000] memory: 02000000 @ 00000000 (usable) > [ 0.000000] Initrd not found or empty - disabling initrd > [ 0.000000] Zone PFN ranges: > [ 0.000000] Normal 0x00000000 -> 0x00002000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] Early memory PFN ranges > [ 0.000000] 0: 0x00000000 -> 0x00002000 > [ 0.000000] On node 0 totalpages: 8192 > [ 0.000000] free_area_init_node: node 0, pgdat 802d6530, node_mem_map > 81000000 > [ 0.000000] Normal zone: 64 pages used for memmap > [ 0.000000] Normal zone: 0 pages reserved > [ 0.000000] Normal zone: 8128 pages, LIFO batch:0 > [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 > [ 0.000000] pcpu-alloc: [0] 0 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 8128 > [ 0.000000] Kernel command line: root=/dev/mtdblock2 > rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 > [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes) > [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 > bytes) > [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 > bytes. > [ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, > linesize 16 bytes > [ 0.000000] Memory: 29228k/32768k available (2521k kernel code, 3540k > reserved, 381k data, 168k init, 0k high > mem) > [ 0.000000] NR_IRQS:128 > [ 0.000000] console [ttyS0] enabled > [ 0.004000] Calibrating delay loop... 262.14 BogoMIPS (lpj=524288) > [ 0.048000] pid_max: default: 32768 minimum: 301 > [ 0.052000] Mount-cache hash table entries: 512 > [ 0.060000] NET: Registered protocol family 16 > [ 0.096000] bio: create slab <bio-0> at 0 > [ 0.108000] Switching to clocksource MIPS > *[ 0.124000] ssb: PCIcore in host mode found > *[ 0.432000] PCI host bridge to bus 0000:00 > [ 0.436000] pci_bus 0000:00: root bus resource [mem > 0x40000000-0x7fffffff] > [ 0.440000] pci_bus 0000:00: root bus resource [io 0x0100-0x07ff] > [ 0.448000] pci 0000:00:00.0: [14e4:4704] type 0 class 0x000600 > [ 0.448000] PCI: Fixing up bridge 0000:00:00.0 > [ 0.452000] pci 0000:00:00.0: setting latency timer to 64 > [ 0.452000] PCI: Fixing up device 0000:00:00.0 > [ 0.456000] PCI: Fixing latency timer of device 0000:00:00.0 to 168 > [ 0.464000] pci 0000:00:00.0: reg 10: [mem 0x00000000-0x00001fff] > [ 0.464000] pci 0000:00:00.0: reg 14: [mem 0x00000000-0x07ffffff pref] > [ 0.464000] pci 0000:00:02.0: [14e4:4350] type 0 class 0x000280 > [ 0.464000] pci 0000:00:02.0: reg 10: [mem 0x00000000-0x00003fff] > [ 0.464000] pci 0000:00:02.0: supports D1 D2 > [ 0.464000] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold > [ 0.464000] pci 0000:00:03.0: [1106:3038] type 0 class 0x000c03 > [ 0.464000] pci 0000:00:03.0: reg 20: [io 0xfce0-0xfcff] > [ 0.464000] pci 0000:00:03.0: supports D1 D2 > [ 0.464000] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot > [ 0.464000] pci 0000:00:03.1: [1106:3038] type 0 class 0x000c03 > [ 0.464000] pci 0000:00:03.1: reg 20: [io 0xfce0-0xfcff] > [ 0.464000] pci 0000:00:03.1: supports D1 D2 > [ 0.464000] pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot > [ 0.464000] pci 0000:00:03.2: [1106:3104] type 0 class 0x000c03 > [ 0.464000] pci 0000:00:03.2: reg 10: [mem 0x00000000-0x000000ff] > [ 0.464000] pci 0000:00:03.2: supports D1 D2 > [ 0.464000] pci 0000:00:03.2: PME# supported from D0 D1 D2 D3hot > [ 0.472000] pci 0000:00:02.0: BAR 0: assigned [mem > 0x40000000-0x40003fff] > [ 0.480000] pci 0000:00:03.2: BAR 0: assigned [mem > 0x40004000-0x400040ff] > [ 0.484000] pci 0000:00:03.0: BAR 4: assigned [io 0x0400-0x041f] > [ 0.492000] pci 0000:00:03.1: BAR 4: assigned [io 0x0420-0x043f] > [ 0.508000] NET: Registered protocol family 2 > [ 0.512000] IP route cache hash table entries: 1024 (order: 0, 4096 > bytes) > [ 0.524000] TCP established hash table entries: 1024 (order: 1, 8192 > bytes) > [ 0.528000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.536000] TCP: Hash tables configured (established 1024 bind 1024) > [ 0.544000] TCP reno registered > [ 0.544000] UDP hash table entries: 256 (order: 0, 4096 bytes) > [ 0.552000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > [ 0.560000] NET: Registered protocol family 1 > [ 0.564000] PCI: CLS 0 bytes, default 16 > [ 0.572000] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 0.580000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) > (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. > [ 0.592000] msgmni has been set to 57 > [ 0.596000] Block layer SCSI generic (bsg) driver version 0.4 loaded > (major 254) > [ 0.604000] io scheduler noop registered > [ 0.608000] io scheduler deadline registered (default) > [ 0.612000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled > [ 0.640000] serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A > [ 0.668000] serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A > [ 0.712000] serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A > [ 0.740000] serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A > [ 0.756000] bcm47xx_pflash: flash init: 0x1c000000 0x02000000 > [ 0.760000] Physically mapped flash: Found 1 x16 devices at 0x0 in > 16-bit bank. Manufacturer ID 0x000001 Chip > ID 0x001301 > [ 0.772000] Physically mapped flash: Found an alias at 0x800000 for the > chip at 0x0 > [ 0.772000] Physically mapped flash: Found an alias at 0x1000000 for > the chip at 0x0 > [ 0.772000] Physically mapped flash: Found an alias at 0x1800000 for > the chip at 0x0 > [ 0.772000] Amd/Fujitsu Extended Query Table at 0x0040 > [ 0.776000] Amd/Fujitsu Extended Query version 1.3. > [ 0.784000] number of CFI chips: 1 > [ 0.784000] bcm47xx_pflash: Flash device: 0x2000000 at 0x1fc00000 > [ 0.792000] bcm47xx_part: bootloader size: 262144 > [ 0.800000] bcm47xx_part: Looking for dual image > [ 0.808000] bcm47xx_part: TRX offset : 0 > [ 0.812000] 4 bcm47xx partitions found on MTD device Physically mapped > flash > [ 0.820000] Creating 4 MTD partitions on "Physically mapped flash": > [ 0.824000] 0x000000000000-0x000000040000 : "cfe" > [ 0.836000] 0x000000040000-0x0000007f0000 : "linux" > [ 0.844000] 0x000000132400-0x0000007f0000 : "rootfs" > [ 0.852000] mtd: partition "rootfs" must either start or end on erase > block boundary or be smaller than an er > ase block -- forcing read-only > [ 0.868000] mtd: partition "rootfs" set to be root filesystem > [ 0.876000] mtd: partition "rootfs_data" created automatically, > ofs=300000, len=4F0000 > [ 0.884000] 0x000000300000-0x0000007f0000 : "rootfs_data" > [ 0.892000] 0x0000007f0000-0x000000800000 : "nvram" > [ 0.908000] bcm47xx_sflash: error registering platform driver: -19 > [ 0.916000] bcm47xx_nflash: error registering platform driver: -19 > [ 0.924000] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version > 2.0 > [ 0.932000] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet > driver 00:18:f3:6b:3f:17 > [ 0.944000] b44 ssb0:1: eth1: PHY Reset would not complete > [ 0.952000] b44 ssb0:1: eth1: Broadcom 44xx/47xx 10/100 PCI ethernet > driver 40:10:18:00:00:2d > [ 0.960000] BCM47xx Watchdog Timer enabled (30 seconds, nowayout) > [ 0.972000] TCP cubic registered > [ 0.972000] NET: Registered protocol family 17 > [ 0.980000] 8021q: 802.1Q VLAN Support v1.8 > [ 0.996000] VFS: Mounted root (squashfs filesystem) readonly on device > 31:2. > [ 1.004000] Freeing unused kernel memory: 168k freed > [ 4.176000] diag: Detected 'ASUS WL-500g Premium' > [ 4.236000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex > [ 4.240000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX > [ 5.384000] roboswitch: Probing device eth0: found a 5325! It's a 5350. > [ 12.688000] JFFS2 notice: (346) jffs2_build_xattr_subsystem: complete > building xattr subsystem, 1 of xdatum ( > 1 unchecked, 0 orphan) and 35 of xref (0 dead, 24 orphan) found. > [ 13.084000] b44 ssb0:0: eth0: powering down PHY > [ 17.020000] Compat-wireless backport release: compat-wireless-2012-07-13 > [ 17.024000] Backport based on wireless-testing.git master-2012-07-16 > [ 17.032000] compat.git: wireless-testing.git > *[ 17.096000] cfg80211: Calling CRDA to update world regulatory domain > [ 17.100000] cfg80211: World regulatory domain updated: > [ 17.108000] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > [ 17.116000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 17.124000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 > mBi, 2000 mBm) > [ 17.132000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 > mBi, 2000 mBm) > [ 17.140000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 17.148000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > *[ 18.012000] Broadcom 43xx driver loaded [ Features: PNL ] > [ 18.228000] PPP generic driver version 2.4.2 > [ 18.484000] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 18.768000] NET: Registered protocol family 24 > [ 18.812000] nf_conntrack version 0.5.0 (459 buckets, 1836 max) > [ 22.624000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex > [ 22.632000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX > 1 unchecked, 0 orphan) and 35 of xref (0 dead, 24 orphan) found. > [ 13.084000] b44 ssb0:0: eth0: powering down PHY > *[ 17.020000] Compat-wireless backport release: > compat-wireless-2012-07-13 > [ 17.024000] Backport based on wireless-testing.git master-2012-07-16 > [ 17.032000] compat.git: wireless-testing.git > [ 17.096000] cfg80211: Calling CRDA to update world regulatory domain > [ 17.100000] cfg80211: World regulatory domain updated: > [ 17.108000] cfg80211: (start_freq - end_freq @ bandwidth), > (max_antenna_gain, max_eirp) > [ 17.116000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 17.124000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 > mBi, 2000 mBm) > [ 17.132000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 > mBi, 2000 mBm) > [ 17.140000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > [ 17.148000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 > mBi, 2000 mBm) > *[ 18.012000] Broadcom 43xx driver loaded [ Features: PNL ] > [ 18.228000] PPP generic driver version 2.4.2 > [ 18.484000] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 18.768000] NET: Registered protocol family 24 > [ 18.812000] nf_conntrack version 0.5.0 (459 buckets, 1836 max) > [ 22.624000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex > [ 22.632000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX > [ 24.484000] b44 ssb0:0: eth0: powering down PHY > [ 24.512000] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex > [ 24.520000] b44 ssb0:0: eth0: Flow control is off for TX and off for RX > [ 24.564000] device eth0.0 entered promiscuous mode > [ 24.568000] device eth0 entered promiscuous mode > [ 24.584000] br-lan: port 1(eth0.0) entered forwarding state > [ 24.588000] br-lan: port 1(eth0.0) entered forwarding state > [ 26.592000] br-lan: port 1(eth0.0) entered forwarding state > > > But if i do: > root@ASUSwl500gp:~# iwconfig > eth0.1 no wireless extensions. > lo no wireless extensions. > eth0.0 no wireless extensions. > eth1 no wireless extensions. > eth0 no wireless extensions. > br-lan no wireless extensions. > > > Thanks in advantage Hauke! > > aitor > > > 2012/10/21 Hauke Mehrtens <[email protected]>: > > > Hi Aitor, > > > > it depends on what type of mesh network you want to build. ieee80211s is > > not supported by kmod-brcm-wl, but other types could work. > > > > b43 should also support your device, your problem with b43 seams to be a > > bug in ssb or b43. Could you please post the output of dmesg when using > > b43 and not brcm-wl. > > > > Hauke > > > > On 10/21/2012 12:56 PM, Aitor Cuartango wrote: > >> To work is necesary install: > >> opkg install wlc kmod-brcm-wl > >> > >> and i removed b43 driver: > >> opkg remobe kmod-b43 > >> > >> One question, is possible get running with this wifi card a MESH > network? > >> kmod-brcm-wl - 3.3.8+5.10.56.27.3-4 - This package contains the > >> proprietary wireless driver for the Broadcom BCM43xx chipset. > >> > >> In the package description says that is a propietary driver... and i > >> have painful experiences with propietary drivers... > >> > >> Thanks! > >> > >> > >> 2012/10/18 Aitor Cuartango <[email protected]>: > >>> Thanks Hauke, > >>> It works with last you said driver "kmod-brcm-wl" . Here the interface: > >>> > >>> wl0 IEEE 802.11abgn ESSID:"" > >>> Mode:Managed Frequency:2.412 GHz Access Point: > Not-Associated > >>> Bit Rate:44 Mb/s Tx-Power:32 dBm > >>> RTS thr:off Fragment thr:off > >>> Power Management:off > >>> Link Quality=5/5 Signal level=0 dBm Noise level=0 dBm > >>> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > >>> Tx excessive retries:0 Invalid misc:0 Missed beacon:0 > >>> > >>> > >>> I have tried with "kmod-b43" and i cannot view the wireless interface, > >>> and i don't locate a module with the words "ssb", could anyone say > >>> witch is exactly the module name of this driver? > >>> > >>> thanks so much, > >>> aitor > >>> > >>> > >>> > >>> 2012/10/15 Aitor Cuartango <[email protected]>: > >>>> Thank you very much ! > >>>> i'll test it and i'll reply again this message to confirm it. > >>>> > >>>> best regards, > >>>> aitor > >>>> > >>>> 2012/10/14 Hauke Mehrtens <[email protected]>: > >>>>> On 10/13/2012 09:24 AM, Aitor Cuartango wrote: > >>>>>> Hi all, > >>>>>> do anyone have experience with Broadcom BCM43222? Is very cheap in > >>>>>> eBay and i have buy one to have a B/G/N network working in my old > >>>>>> router. > >>>>>> > >>>>>> I have installed in my Asus WL-500g Premium flased with Attitude > >>>>>> Adjustment (12.09-beta), but i cannot locate the apropiate driver > to > >>>>>> get it working... > >>>>>> > >>>>>> Do anyone have experience with this card? > >>>>>> > >>>>>> thanks! > >>>>>> aitor > >>>>> > >>>>> BCM43222 is supported by ssb and b43 and should work in OpenWrt > >>>>> 12.09-beta with 11g rates in 2.4 GHz band, it could also work with > >>>>> broadcom-wl. > >>>>> > >>>>> Hauke > > >
_______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-users
