Le Mon, 2 Dec 2013 07:21:38 -0800, camden lindsay <[email protected]> a écrit :
> It is hard to say what went wrong. > Have you left it for a long time after the flash? (5-10 mins) > sometimes it takes a while to come back (based on my experience with > a different router, i think because it has to re-write all of flash, > but not sure) > > What method did you use for the installation? Web, tftp, sysupgrade.. > and what image? There are some odd instructions about mkimage.sh i > have not seen for other models on that model page. > > have you tried booting to failsafe mode in case of some odd bad > configuration? > http://wiki.openwrt.org/doc/howto/generic.failsafe > > After those possibilities, it would be connecting via console and > seeing what happens/providing output to a list to see the problem > http://wiki.openwrt.org/toh/netgear/dg834.v4#serial > http://wiki.openwrt.org/doc/hardware/port.serial > > Or, re-attempting flash through some other means .. althought I don't > see any mention of a tftp server running in your bootloader, that is > sometimes an option. But again i don't know in case of your device.. > > Hopefully some of this info is helpful... I try to re-flash by nftp, that is the method was i use. no change. i try to make a serial cable rs232 but i am not exactly BC337, what the fonction of this transistor ? need to by a rs232 plug but i have the E12 resistor series a max232 is obligatory for the serial liaison work ? after how i connect on the router by serial cable ? Regard, major. ps: in the futur it's more commonly to use another submask for connect to the router, the most box use 192.168.1.0 for connect to internet and it's can't possible to have internet at the same time with a flashed's router as we have two Ethernet card. and it's more easy we can search when we are a problem. _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
