Thnx weedy for the links, only use the first two to buy/example the last one is a rs485 ttl converter (that's different).
2013/12/3 Weedy <[email protected]>: > http://dx.com/p/pl2303hx-usb-to-ttl-converter-adapter-module-w-dubond-thread-blue-224704 > http://dx.com/p/pl2303hx-usb-to-rs232-ttl-converter-adapter-module-164590 > http://dx.com/p/max485-ttl-to-rs485-adapter-module-for-singlechip-red-203318 > > > On Tue, Dec 3, 2013 at 3:10 AM, Martijn Zilverschoon > <[email protected]> wrote: >> >> Level sifting to 3.3v ttl is needed, you can also buy them as usb to >> ttl. Just make sure that it gives out 3.3v >> Also if you connect the converter, make sure that you don't connect the >> Vcc line >> This is not needed for serial, and could potentially damage the board. >> >> for example: >> http://wiki.openwrt.org/doc/hardware/port.serial#usb.to.rs232.ttl.converter.module >> there are also different brands and models, but as long as it is 3.3v it >> is ok >> _______________________________________________ >> openwrt-users mailing list >> [email protected] >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users > > > > _______________________________________________ > openwrt-users mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users > _______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
