http://dx.com/p/pl2303hx-usb-to-ttl-converter-adapter-module-w-dubond-thread-blue-224704 http://dx.com/p/pl2303hx-usb-to-rs232-ttl-converter-adapter-module-164590 http://dx.com/p/max485-ttl-to-rs485-adapter-module-for-singlechip-red-203318
On Tue, Dec 3, 2013 at 3:10 AM, Martijn Zilverschoon < [email protected]> wrote: > Level sifting to 3.3v ttl is needed, you can also buy them as usb to > ttl. Just make sure that it gives out 3.3v > Also if you connect the converter, make sure that you don't connect the > Vcc line > This is not needed for serial, and could potentially damage the board. > > for example: > http://wiki.openwrt.org/doc/hardware/port.serial#usb.to.rs232.ttl.converter.module > there are also different brands and models, but as long as it is 3.3v it > is ok > _______________________________________________ > openwrt-users mailing list > [email protected] > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users >
_______________________________________________ openwrt-users mailing list [email protected] https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-users
