From: Jason Hlady; Sent: Tuesday, December 09, 2003 9:29 AM [deletia] > The problem: when I go to install the nodes, the client (I presume > this is the systeminstaller client) boots, but then times out on > DHCPDISCOVER, checking only loopback and not finding eth0 or eth1. > dhclient starts, and you get > > Listening on LPF/lo/<null> > Sending on LPF/lo/<null> > Sending on Socket/Fallback/fallback > DHCPDISCOVER on lo to 255.255.255.255 on port .. > DHCPDISCOVER on lo to 255.255.255.255 on port ... > DHCPDISCOVER on lo to 255.255.255.255 on port ... > DHCPDISCOVER on lo to 255.255.255.255 on port ... > DHCPDISCOVER on lo to 255.255.255.255 on port ... > No DHCPOFFERS received.
So, we know the dhcp server is properly configured for the client, as it downloaded the systemimager kernel and initrd. Shortly after the initrd started, dhclient ran, sadly it's listening on the loopback interface, where it will never find a server... The question is: why doesn't the systemimager kernel/initrd see the device? What NICs do you have in the clients? -- David N. Lombard My comments represent my opinions, not those of Intel. ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users
