Sorry... I was thinking that worked before, but wasn't sure. What type of NIC and hard drive controller do your 1750's use?

Jeremy

At 01:13 PM 12/9/2003, Jason Hlady wrote:
Thanks for the try...

I copied that kernel to /tftpboot, and copied that initrd to /tftpboot as well.

After gzipping initrd, and mv'ing it to initrd.img, the kernel started to boot, but then hit

read super_block: cant find a reiserfs filesystem on (dev 01:00, block 10, size 4096)
read super_block: cant find a reiserfs filesystem on (dev 01:00, block 10, size 4096)
Kernel Panic: VFS: unable to mount root fs on 01:00


So either I did something wrong with the initrd, or it's not happy with my hardware. Hmm. Any further ideas? I freely admit that I'm not much of a kernel guy, so I might have just screwed this up.

Jason


On Dec 9, 2003, at 12:54 PM, Jeremy Enos wrote:


At 12:37 PM 12/9/2003, Lombard, David N wrote:
From: Jason Hlady; Sent: Tuesday, December 09, 2003 9:29 AM
[deletia]
> The problem:  when I go to install the nodes, the client (I presume
> this is the systeminstaller client) boots, but then times out on
> DHCPDISCOVER, checking only loopback and not finding eth0 or eth1.
> dhclient starts, and you get
>
> Listening on LPF/lo/<null>
> Sending on LPF/lo/<null>
> Sending on Socket/Fallback/fallback
> DHCPDISCOVER on lo to 255.255.255.255 on port ..
> DHCPDISCOVER on lo to 255.255.255.255 on port ...
> DHCPDISCOVER on lo to 255.255.255.255 on port ...
> DHCPDISCOVER on lo to 255.255.255.255 on port ...
> DHCPDISCOVER on lo to 255.255.255.255 on port ...
> No DHCPOFFERS received.

So, we know the dhcp server is properly configured for the client, as it
downloaded the systemimager kernel and initrd.

Shortly after the initrd started, dhclient ran, sadly it's listening on
the loopback interface, where it will never find a server...

The question is: why doesn't the systemimager kernel/initrd see the
device?

Because it's out of date. Try this kernel/initrd combo that I had to use on the 2650's w/ broadcom nics...
http://sponge.ncsa.uiuc.edu/~jenos/2650/


Jeremy

What NICs do you have in the clients?

--
David N. Lombard

My comments represent my opinions, not those of Intel.


--------------
Jason Hlady, B. Sc., M. Sc. (Chem), Adv. Cert. (Comp. Sci.)
Programmer/Analyst (Bioinformatics Specialist)
U of Saskatchewan, Bioinformatics Research Laboratory (BIRL)
[EMAIL PROTECTED] (306) 966-2075



-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
Oscar-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/oscar-users



------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ Oscar-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/oscar-users

Reply via email to