Hi, I am new to OSCAR and I am have trouble getting the client nodes imaged. I am using OSCAR 5.0 on RHEL 4.0. The head node is an IBM X220 (x86), while the client nodes are all IBM x330 (x86). I make it to step 6 and setup the network stuff. I am using systemimager-rsync. The clients are doing a PXE boot and getting the boot image from tftp. It boots up and gets to the point of rsyncing the image. At this point the client reboots and starts the process all over. I have SELinux disabled, no firewall, and "PermitRootLogin yes" in the sshd_config file.
Here is the message from the virtual console, the output into /var/log/systemimager/rsyncd, the oscarinstall.log, http://www.pastebin.ca/981556 In the virtual console it gets to the last rsync command and the client reboots and goes through the process again, over and over. It does not look like any data is transfered. Any help would be appreciated. Thanks, Cary Bernath ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Oscar-users mailing list Oscar-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/oscar-users
