ok, first, i want to make sure i understand.
 
when connecting from "outside," you're connecting from somewhere where you're 
trying to access via the 169.236.129.234 address (eth0 interface).
 
when connecting from "inside," you're doing it from somewhere else on your 10. 
network, trying to access via the eth1 interface, which is 10.0.0.2?
 
the inside hang is probably because there's no /etc/hosts entry at all now for 
10.0.0.2.  
 
as for the outside, that may be a misconfigured firewall or something -- can 
you ping the box (assuming you're not blocking ping)?  can you `telnet 
169.236.129.234 22` (telnet to the sshd port) to see if you can connect?  i 
think that this problem is not oscar, but network or firewall related.  can you 
connect to the outside world from madrid (i.e. can you ping google or access 
some web site or something to ensure that the network connection between madrid 
and the world is working)?
 
--Joe

________________________________

From: [EMAIL PROTECTED] on behalf of Joseph Norris
Sent: Mon 8/11/2008 2:52 PM
To: oscar-users@lists.sourceforge.net
Subject: Re: [Oscar-users] Oscar installed - tests run - problem withheadnode



Here is what I have now:

# Do not remove the following line, or various programs
# that require network functionality will fail.

127.0.0.1       localhost.localdomain   localhost

169.236.129.234 madrid.ucmerced.edu     madrid


# These entries are managed by SIS, please don't modify them.
10.0.0.3             oscarnode1.ucmerced.edu    oscarnode1
10.0.0.4             oscarnode2.ucmerced.edu    oscarnode2
10.0.0.5             oscarnode3.ucmerced.edu    oscarnode3
10.0.0.6             oscarnode4.ucmerced.edu    oscarnode4


I am still getting a 20-30 second wait for password from boxes inside my
network - when I do the following from inside:

ssh -vvv [EMAIL PROTECTED]  - I get:

 OpenSSH_4.3p2, OpenSSL 0.9.8b 04 May 2006
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to madrid.ucmerced.edu [169.236.129.234] port 22.
debug1: Connection established.
debug1: identity file /home/joseph/.ssh/identity type -1
debug1: identity file /home/joseph/.ssh/id_rsa type -1
debug1: identity file /home/joseph/.ssh/id_dsa type -1
debug1: loaded 3 keys
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.3
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[EMAIL
 PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[EMAIL
 PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[EMAIL PROTECTED],zlib
debug2: kex_parse_kexinit: none,[EMAIL PROTECTED],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit:
diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[EMAIL
 PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,[EMAIL
 PROTECTED],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit:
hmac-md5,hmac-sha1,hmac-ripemd160,[EMAIL PROTECTED],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[EMAIL PROTECTED]
debug2: kex_parse_kexinit: none,[EMAIL PROTECTED]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 122/256
debug2: bits set: 505/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: check_host_in_hostfile: filename /home/joseph/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 13
debug3: check_host_in_hostfile: filename /home/joseph/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 11
debug1: Host 'madrid.ucmerced.edu' is known and matches the RSA host key.
debug1: Found key in /home/joseph/.ssh/known_hosts:13
debug2: bits set: 502/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/joseph/.ssh/identity ((nil))
debug2: key: /home/joseph/.ssh/id_rsa ((nil))
debug2: key: /home/joseph/.ssh/id_dsa ((nil))

After the 30+ second wait I get a password prompt:

debug3: packet_send2: adding 48 (len 64 padlen 16 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 0
debug3: tty_make_modes: ospeed 38400
debug3: tty_make_modes: ispeed 38400
debug3: tty_make_modes: 1 3
debug3: tty_make_modes: 2 28
debug3: tty_make_modes: 3 127
debug3: tty_make_modes: 4 21
debug3: tty_make_modes: 5 4
debug3: tty_make_modes: 6 0
debug3: tty_make_modes: 7 0
debug3: tty_make_modes: 8 17
debug3: tty_make_modes: 9 19
debug3: tty_make_modes: 10 26
debug3: tty_make_modes: 12 18
debug3: tty_make_modes: 13 23
debug3: tty_make_modes: 14 22
debug3: tty_make_modes: 18 15
debug3: tty_make_modes: 30 0
debug3: tty_make_modes: 31 0
debug3: tty_make_modes: 32 0
debug3: tty_make_modes: 33 0
debug3: tty_make_modes: 34 0
debug3: tty_make_modes: 35 0
debug3: tty_make_modes: 36 1
debug3: tty_make_modes: 37 0
debug3: tty_make_modes: 38 1
debug3: tty_make_modes: 39 0
debug3: tty_make_modes: 40 0
debug3: tty_make_modes: 41 0
debug3: tty_make_modes: 50 1
debug3: tty_make_modes: 51 1
debug3: tty_make_modes: 52 0
debug3: tty_make_modes: 53 1
debug3: tty_make_modes: 54 1
debug3: tty_make_modes: 55 1
debug3: tty_make_modes: 56 0
debug3: tty_make_modes: 57 0
debug3: tty_make_modes: 58 0
debug3: tty_make_modes: 59 1
debug3: tty_make_modes: 60 1
debug3: tty_make_modes: 61 1
debug3: tty_make_modes: 62 0
debug3: tty_make_modes: 70 1
debug3: tty_make_modes: 71 0
debug3: tty_make_modes: 72 1
debug3: tty_make_modes: 73 0
debug3: tty_make_modes: 74 0
debug3: tty_make_modes: 75 0
debug3: tty_make_modes: 90 1
debug3: tty_make_modes: 91 1
debug3: tty_make_modes: 92 0
debug3: tty_make_modes: 93 0
debug1: Sending environment.
debug3: Ignored env HOSTNAME
debug3: Ignored env TERM
debug3: Ignored env SHELL
debug3: Ignored env HISTSIZE
debug3: Ignored env SSH_CLIENT
debug3: Ignored env CVSROOT
debug3: Ignored env SSH_TTY
debug3: Ignored env USER
debug3: Ignored env LS_COLORS
debug3: Ignored env MAIL
debug3: Ignored env PATH
debug3: Ignored env INPUTRC
debug3: Ignored env PWD
debug1: Sending env LANG = en_US.UTF-8
debug2: channel 0: request env confirm 0
debug3: Ignored env SSH_ASKPASS
debug3: Ignored env SHLVL
debug3: Ignored env HOME
debug3: Ignored env LOGNAME
debug3: Ignored env CVS_RSH
debug3: Ignored env SSH_CONNECTION
debug3: Ignored env LESSOPEN
debug3: Ignored env G_BROKEN_FILENAMES
debug3: Ignored env _
debug2: channel 0: request shell confirm 0
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Last login: Mon Aug 11 11:46:46 2008 from 169.236.129.235

 From outside the network I get:

[EMAIL PROTECTED]:]$ ssh -vvv [EMAIL PROTECTED]
OpenSSH_4.4p1, OpenSSL 0.9.7l 28 Sep 2006
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to madrid.ucmerced.edu [169.236.129.234] port 22.


just hangs there and no password.


In the messages log I am getting:

Aug 11 11:39:32 madrid sshd[3899]: error: Bind to port 22 on 0.0.0.0
failed: Address already in use.
Aug 11 11:39:34 madrid sshd[3761]: pam_unix(sshd:session): session
closed for user joseph
Aug 11 11:40:39 madrid sshd[3903]: Accepted password for joseph from
169.236.129.235 port 52030 ssh2
Aug 11 11:40:39 madrid sshd[3903]: pam_unix(sshd:session): session
opened for user joseph by (uid=0)
Aug 11 11:41:30 madrid sudo:   joseph : TTY=pts/1 ; PWD=/home/joseph ;
USER=root ; COMMAND=/bin/bash
Aug 11 11:46:46 madrid sshd[4536]: Accepted password for joseph from
169.236.129.235 port 54462 ssh2
Aug 11 11:46:46 madrid sshd[4536]: pam_unix(sshd:session): session
opened for user joseph by (uid=0)
Aug 11 11:46:48 madrid sshd[4536]: pam_unix(sshd:session): session
closed for user joseph
Aug 11 11:48:35 madrid sshd[4606]: Accepted password for joseph from
169.236.129.235 port 38358 ssh2
Aug 11 11:48:35 madrid sshd[4606]: pam_unix(sshd:session): session
opened for user joseph by (uid=0)


and nothing registered from login on the outside - no password and then
times out.



Greenseid, Joseph M. wrote:
> very strange.  one last question about the hosts file.  the network setup 
> section of the install guide recommends separating the localhost name and 
> actual hostname into two separate lines in the hosts file before starting the 
> installation.  did you do this before you started the install?  if not, i 
> wonder if that had something to do with things getting so mangled.
> 
> anyway, if you fix it up, hopefully it'll all work fine. 
> 
> --Joe
>
> ________________________________
>
> From: [EMAIL PROTECTED] on behalf of Joseph Norris
> Sent: Mon 8/11/2008 2:26 PM
> To: oscar-users@lists.sourceforge.net
> Subject: Re: [Oscar-users] Oscar installed - tests run - problem withheadnode
>
>
>
> As you see the hosts file - this is how oscar left it.  I did not begin
> looking at this or editing it until I discovered this issue and there
> was not an external IP in the hosts file.
>
> Greenseid, Joseph M. wrote:
>  
>> oscar deleted the public address line from your hosts file?
>>
>> --Joe
>>
>> ________________________________
>>
>> From: [EMAIL PROTECTED] on behalf of Joseph Norris
>> Sent: Mon 8/11/2008 2:00 PM
>> To: oscar-users@lists.sourceforge.net
>> Subject: Re: [Oscar-users] Oscar installed - tests run - problem withheadnode
>>
>>
>>
>> This was the way oscar built my file and it was a bit odd to me also. I
>> have eth0 aimed at the outside IP address of  169.236.129.234.  eth1 is
>> aimed at the nodes.  Oscar built this host file in this way.  I will
>> modify it but leave the compute nodes in place.
>>
>> Greenseid, Joseph M. wrote:
>> 
>>    
>>> joseph,
>>>
>>> i had the same thought as donginn -- having "madrid.ucmerced.edu" on both 
>>> the 127.0.0.1 line *AND* the 10.0.0.2 line may well be confusing the 
>>> system.  as a general rule, i've taken to having the first line of the 
>>> hosts file be "127.0.0.1 localhost.localdomain localhost" and that's it, 
>>> and have the hostname on the line with the reachable IP addr.
>>>
>>> as for the ssh problems specifically, a verbose trace of the ssh connection 
>>> may yield some more specific information than our best guess at the hosts 
>>> file configuration -- try to add a "-v" to the ssh command and see where 
>>> it's stalling out. 
>>>
>>> also, how do you connect to this box from "outside?"  from this hosts file, 
>>> it looks like the head node has a 10. addr that it uses to talk to the 
>>> cluster nodes, but no separate "public" facing address, as is customarily 
>>> the case with clusters (a public facing addr on the head node, and a 
>>> private network that the head node and all the compute nodes are on, so the 
>>> compute nodes are not reachable directly from anywhere except inside the 
>>> cluster).
>>>
>>> --Joe
>>>
>>> ________________________________
>>>
>>> From: [EMAIL PROTECTED] on behalf of DongInn Kim
>>> Sent: Mon 8/11/2008 1:08 PM
>>> To: oscar-users@lists.sourceforge.net
>>> Subject: Re: [Oscar-users] Oscar installed - tests run - problem 
>>> withheadnode
>>>
>>>
>>>
>>> Hi Joseph,
>>>
>>> I don't know how to avoid the OSCAR sanity checking of network 
>>> configuration(especially /etc/hosts) because OSCAR does not like to have 
>>> any actual hostname rather than localhost.localdomain.
>>>
>>> http://svn.oscar.openclustergroup.org/trac/oscar/wiki/InstallGuideNetwork#NIC
>>>
>>> This is from the OSCAR install guide.
>>>
>>> Anyway, I am wondering if the 127.0.0.1 line caused the problem on your 
>>> test. I am not really sure though.
>>>
>>> Regards,
>>>
>>> - DongInn
>>>
>>>
>>> Joseph Norris wrote:
>>>
>>>   
>>>      
>>>> I was able to get oscar totally installed, tests run, X11 issues
>>>> resolved etc...  Now I have the following issue.
>>>>
>>>> On head node I have ssh open on my fire wall  When I log in from another
>>>> box within my network it takes between 30-40 seconds to get a password
>>>> prompt and from outside I get no password prompt at all.  I discussed
>>>> this with another sys admin and he suggested that I look at resolv.conf
>>>> - however this has the same structure as the other redhat servers that I
>>>> administrate and I can reach the just fine.
>>>>
>>>> I was wondering if my hosts file is correct?  or how I should
>>>> trouble-shoot this issue?
>>>>
>>>> Hosts file:
>>>> 127.0.0.1       madrid.ucmerced.edu     madrid  localhost.localdomain
>>>> localhos
>>>> t
>>>> 10.0.0.2        madrid.ucmerced.edu     oscar_server    oscar_server
>>>> nfs_osca
>>>> r       pbs_oscar
>>>>
>>>>
>>>> # These entries are managed by SIS, please don't modify them.
>>>> 10.0.0.3             oscarnode1.ucmerced.edu    oscarnode1
>>>> 10.0.0.4             oscarnode2.ucmerced.edu    oscarnode2
>>>> 10.0.0.5             oscarnode3.ucmerced.edu    oscarnode3
>>>> 10.0.0.6             oscarnode4.ucmerced.edu    oscarnode4
>>>>
>>>>
>>>> Thanks.
>>>>
>>>>
>>>>
>>>>  
>>>>     
>>>>        
>>> -------------------------------------------------------------------------
>>> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
>>> Build the coolest Linux based applications with Moblin SDK & win great 
>>> prizes
>>> Grand prize is a trip for two to an Open Source event anywhere in the world
>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>>> _______________________________________________
>>> Oscar-users mailing list
>>> Oscar-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/oscar-users
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>> -------------------------------------------------------------------------
>>> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
>>> Build the coolest Linux based applications with Moblin SDK & win great 
>>> prizes
>>> Grand prize is a trip for two to an Open Source event anywhere in the world
>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Oscar-users mailing list
>>> Oscar-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/oscar-users
>>>
>>>   
>>>      
>> --
>> Joseph Norris
>> Application Developer & Server Adminstrator
>> 209-228-4576
>> [EMAIL PROTECTED]
>>
>>
>> -------------------------------------------------------------------------
>> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
>> Build the coolest Linux based applications with Moblin SDK & win great prizes
>> Grand prize is a trip for two to an Open Source event anywhere in the world
>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>> _______________________________________________
>> Oscar-users mailing list
>> Oscar-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/oscar-users
>>
>>
>> 
>> ------------------------------------------------------------------------
>>
>> -------------------------------------------------------------------------
>> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
>> Build the coolest Linux based applications with Moblin SDK & win great prizes
>> Grand prize is a trip for two to an Open Source event anywhere in the world
>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Oscar-users mailing list
>> Oscar-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/oscar-users
>> 
>>    
>
> --
> Joseph Norris
> Application Developer & Server Adminstrator
> 209-228-4576
> [EMAIL PROTECTED]
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Oscar-users mailing list
> Oscar-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/oscar-users
>
>
>  
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> ------------------------------------------------------------------------
>
> _______________________________________________
> Oscar-users mailing list
> Oscar-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/oscar-users
>  

--
Joseph Norris
Application Developer & Server Adminstrator
209-228-4576
[EMAIL PROTECTED]


-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Oscar-users mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users


<<winmail.dat>>

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Oscar-users mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users

Reply via email to