the ip address id automatically configured.....and even it says in the
installation guide that the hosts file should look like the one i have
specified.... thanx for reply....help please.....
> Date: Mon, 6 Sep 2010 17:38:29 -0400
> From: cfr...@psu.edu
> To: oscar-users@lists.sourceforge.net
> Subject: Re: [Oscar-users] Please Help
>
> 2010/9/6 Hammad Ali <andy4...@hotmail.com>:
> > ./install_cluster eth0
> <snip>
> > my /etc/hosts file is
> >
> > # Do not remove the following line, or various programs
> > # that require network functionality will fail.
> > 127.0.0.1 localhost.localdomain localhost
> > 10.0.4.245 oscarhost.oscardomain oscarhost
> >
> > what should i do?
>
> Is 10.0.4.245 associated with eth0, or do you have another internal interface?
>
> If this is eth0, just delete the entry (oscar will add it back in).
>
> Typically, your headnode has a public and a private interface. The
> private interface is eth0, and the public is eth1.
>
> What is the intended ip addresses?
>
> ------------------------------------------------------------------------------
> This SF.net Dev2Dev email is sponsored by:
>
> Show off your parallel programming skills.
> Enter the Intel(R) Threading Challenge 2010.
> http://p.sf.net/sfu/intel-thread-sfd
> _______________________________________________
> Oscar-users mailing list
> Oscar-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/oscar-users
------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:
Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Oscar-users mailing list
Oscar-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/oscar-users
