Dear Asma I've the same problem with QuickBird images.
Have you ever tested Orthorectification process with this kind of images? You said that with the geoeye images the process does work, can you share the input and output geom? Thanks Francesco. Il giorno mercoledì 17 luglio 2013 14:59:58 UTC+2, Asma Nkhili ha scritto: > > Hi everyone!! > > i had problems on my orthorectification...in fact there is no one change > between orthorectified image and raw image! > So here is the command line that i use : > First to write KWL on geom file ! > otbcli_ReadImageInfo > -in F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000.tif > -outkwl F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000.geom > > Second to RefineSensorModel > > otcli_RefineSensorModel > -ingeom F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000.geom > -outgeom > F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000_refined.geom > -inpoints F:\OrthoRectification\tie_points_to_RefineSensorModel.txt -map > wgs -elev.dem F:\OrthoRectification\DTED1 > elev.geoid F:\OrthoRectification\egm96.grd > > Finally to orthorectify > > otbcli_OrthoRectification -io.in > "F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000.tif?&geom= > F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000_refined.geom" > -io.out > F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000_ortho_test.tif > -map epsg -map.epsg.code 32632 -outputs.mode autospacing outputs.spacingx > 1 outputs.spacingy 1 -elev.dem F:\OrthoRectification\DTED1 > -elev.geoid F:\OrthoRectification\egm96.grd -interpolator bco > -interpolator.bco.radius 2 > > > I attached Gdalinfo input and output, geom file, refine_geom file and rpc! > > Thanks for u help! > -- -- Check the OTB FAQ at http://www.orfeo-toolbox.org/FAQ.html You received this message because you are subscribed to the Google Groups "otb-users" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/otb-users?hl=en --- You received this message because you are subscribed to the Google Groups "otb-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
