And also,
Please have a look at the "Beware of orthoready products" section in our
CookBook :
https://www.orfeo-toolbox.org/CookBook/CookBooksu38.html#x59-810004.2.4
When output image is the same as input image after ortho, there are 99%
of chances it is actually a ortho-ready product.
The cookbook provides guidelines to check if your product is orthoready,
and a workaround to process it using extended filename if so.
Regards,
Julien
Le 04/08/2015 15:29, Julien Michel a écrit :
Hi all,
Can you all post the output of the ReadImageInfo command here ? I mean
the terminal output, not the geom file.
Thanks,
Regards,
Julien
Le 30/07/2015 10:59, Francesco Sorice a écrit :
Dear Asma
I've the same problem with QuickBird images.
Have you ever tested Orthorectification process with this kind of images?
You said that with the geoeye images the process does work, can you
share the input and output geom?
Thanks
Francesco.
Il giorno mercoledì 17 luglio 2013 14:59:58 UTC+2, Asma Nkhili ha
scritto:
Hi everyone!!
i had problems on my orthorectification...in fact there is no one
change between orthorectified image and raw image!
So here is the command line that i use :
First to write KWL on geom file !
otbcli_ReadImageInfo
-in F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000.tif
-outkwl F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000.geom
Second to RefineSensorModel
otcli_RefineSensorModel
-ingeom F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000.geom
-outgeom
F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000_refined.geom
-inpoints F:\OrthoRectification\tie_points_to_RefineSensorModel.txt
-map wgs -elev.dem F:\OrthoRectification\DTED1
elev.geoid F:\OrthoRectification\egm96.grd
Finally to orthorectify
otbcli_OrthoRectification -io.in
<http://io.in/>
"F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000.tif?&geom=
F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000_refined.geom"
-io.out
F:\mission_silat\donnees_lisah\Ikonos\po_1255_pan_0000000_ortho_test.tif
-map epsg -map.epsg.code 32632 -outputs.mode autospacing
outputs.spacingx 1 outputs.spacingy 1 -elev.dem
F:\OrthoRectification\DTED1
-elev.geoid F:\OrthoRectification\egm96.grd -interpolator bco
-interpolator.bco.radius 2
I attached Gdalinfo input and output, geom file, refine_geom file
and rpc!
Thanks for u help!
--
--
Check the OTB FAQ at
http://www.orfeo-toolbox.org/FAQ.html
You received this message because you are subscribed to the Google
Groups "otb-users" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/otb-users?hl=en
---
You received this message because you are subscribed to the Google
Groups "otb-users" group.
To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
Julien MICHEL
CNES - DCT/SI/AP - BPI 1219
18, avenue Edouard Belin
31401 Toulouse Cedex 09 - France
Tel: +33 561 282 894 - Fax: +33 561 283 109
--
--
Check the OTB FAQ at
http://www.orfeo-toolbox.org/FAQ.html
You received this message because you are subscribed to the Google
Groups "otb-users" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/otb-users?hl=en
---
You received this message because you are subscribed to the Google
Groups "otb-users" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to [email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
Julien MICHEL
CNES - DCT/SI/AP - BPI 1219
18, avenue Edouard Belin
31401 Toulouse Cedex 09 - France
Tel: +33 561 282 894 - Fax: +33 561 283 109
--
--
Check the OTB FAQ at
http://www.orfeo-toolbox.org/FAQ.html
You received this message because you are subscribed to the Google
Groups "otb-users" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/otb-users?hl=en
---
You received this message because you are subscribed to the Google Groups "otb-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
