Hi Ales, how are you?

Sorry, for talking about this again.

I'm using dynamic_neigh_routers in my scenario, so copp could drop valid
packets.
Or at least to have high latency to resolve the ARP.

Following my example, a logical flow like could works:
ovn-nbctl show lr13
router 3ee35ba1-605b-49cf-add4-9c0f2b521d84 (lr13)
    port ts1001-lr13
        mac: "12:00:00:d9:b5:d3"
        ipv6-lla: "fe80::1000:ff:fed9:b5d3"
        networks: ["169.254.11.3/24"]
    port rp13-bar
        mac: "00:01:ff:22:00:03"
        ipv6-lla: "fe80::201:ffff:fe22:3"
        networks: ["192.168.30.1/24"]


port ts1001-lr13 is used for interconnect, rp13-bar is used for gw of
subnet.

I'm thinking in something like:
table=27(lr_in_arp_request), priority=105,  match=(eth.dst ==
00:00:00:00:00:00 && reg9[9] == 1 && outport == "rp13-bar" && reg0 ==
192.168.30.0/24),   action=(drop;)
  table=27(lr_in_arp_request  ), priority=100  , match=(eth.dst ==
00:00:00:00:00:00 && reg9[9] == 0), action=(nd_ns { nd.target = xxreg0;
output; }; next;)
  table=27(lr_in_arp_request  ), priority=100  , match=(eth.dst ==
00:00:00:00:00:00 && reg9[9] == 1), action=(arp { eth.dst =
ff:ff:ff:ff:ff:ff; arp.spa = reg5; arp.tpa = reg0; arp.op = 1; output; };
next;)
  table=27(lr_in_arp_request  ), priority=0    , match=(1), action=(next;)

I'll apply a config in rp13-bar (I'm still thinking of a good name for
config), and with config ovn-northd will generate lflow with prio 105.

Does it make sense?

Regards,
Lucas



Em qui., 4 de dez. de 2025 às 09:43, Ales Musil <[email protected]>
escreveu:

>
>
> On Thu, Dec 4, 2025 at 1:40 PM Lucas Vargas Dias <
> [email protected]> wrote:
>
>> Hi,
>>
>> We're testing the CoPP, in the first tests, it works correctly.
>>
>> I agree about avoiding new options.
>>
>>
>> Regards,
>> Lucas
>>
>
> Thank you,
>
> based on that I'll mark the series as deferred for now.
>
> Regards,
> Ales
>
>
>>
>> Em sex., 28 de nov. de 2025 às 07:29, Ales Musil <[email protected]>
>> escreveu:
>>
>>>
>>>
>>> On Mon, Oct 27, 2025 at 9:21 PM Lucas Vargas Dias via dev <
>>> [email protected]> wrote:
>>>
>>>> Consider the following scenario:
>>>> (192.168.10.10/24) VM1 -> LS -> LR -> TS -> LR -> LS -> VM2 (
>>>> 192.168.20.20/24)
>>>>
>>>> Also, LSPs from LS have the addresses configured, it's not used unknown
>>>> addresses
>>>> in this case.
>>>>
>>>> Ping from VM1 to VM2 works correctly, it's ok. But, if VM1 try to flood,
>>>> for example the IP 192.168.20.30 (an innexistent LSP), we'll see a high
>>>> CPU load in
>>>> ovn-controller from the network destination due to the get_arp function.
>>>> For this case, ovn-controller have ovn-is-interconn = true.
>>>>
>>>> In the connection LR -> TS -> LR all addresses are known, so arp resolve
>>>> could be disable. For this case, add the option disable_arp_resolve=true
>>>> to logical_router_port drop the packets for unknown addresses. If the
>>>> communication is IPv6, configure the option disable_nd_resolve=true.
>>>>
>>>>
>>>> Co-authored-by: Tiago Matos Carvalho Reis <[email protected]>
>>>> Signed-off-by: Tiago Matos Carvalho Reis <[email protected]>
>>>> Signed-off-by: Lucas Vargas Dias <[email protected]>
>>>> ---
>>>>
>>>
>>> Hi Lucas,
>>>
>>> sorry for the late response, but I have to agree with Lorenzo and
>>> Alexander on this. Both of them mentioned CoPP as a solution which
>>> makes sense considering the problem seems to be high ovn-controller
>>> CPU usage in pinctrl. And it makes me wonder if there is any reason
>>> why couldn't CoPP be used? It was built exactly for this to limit
>>> the traffic towards userspace, to protect the control plane.
>>>
>>> There might be another solution, that is ACLs. Would that be
>>> feasible in any capacity for you to create ACLs that would block
>>> this traffic? As you said in your case those IPs are known I think
>>> it should be possible to create ACL drop flow based on those IPs.
>>>
>>> While there isn't technically anything wrong with the option,
>>> it's the fact that we would be adding another option. I would
>>> love to avoid that if possible, especially if any of the solutions
>>> above would work. My bet would be on the CoPP, because as I said,
>>> it's specifically made for those scenarios.
>>>
>>> Please let me know what you think.
>>>
>>> Thanks,
>>> Ales
>>>
>>>
>>>>  northd/northd.c     | 54 ++++++++++++++++++++++++++++++
>>>>  ovn-nb.xml          | 13 ++++++++
>>>>  tests/ovn-northd.at | 81 +++++++++++++++++++++++++++++++++++++++++++++
>>>>  3 files changed, 148 insertions(+)
>>>>
>>>> diff --git a/northd/northd.c b/northd/northd.c
>>>> index 9da995cea..356dbaa94 100644
>>>> --- a/northd/northd.c
>>>> +++ b/northd/northd.c
>>>> @@ -14940,6 +14940,60 @@ build_arp_resolve_flows_for_lrp(struct
>>>> ovn_port *op,
>>>>                                      &op->nbrp->header_,
>>>>                                      lflow_ref);
>>>>          }
>>>> +
>>>> +        bool discard_arp_resolve = smap_get_bool(&op->nbrp->options,
>>>> +            "disable_arp_resolve", false);
>>>> +        bool discard_nd_resolve = smap_get_bool(&op->nbrp->options,
>>>> +            "disable_nd_resolve", false);
>>>> +        if (discard_arp_resolve || discard_nd_resolve) {
>>>> +            ds_clear(match);
>>>> +
>>>> +            ds_put_format(match, "inport == %s &&
>>>> is_chassis_resident(%s) && "
>>>> +                "(", op->json_key, op->cr_port->json_key);
>>>> +
>>>> +            size_t match_len = match->length;
>>>> +            for (size_t i = 0; i < op->od->nbr->n_ports; i++) {
>>>> +                struct nbrec_logical_router_port *lrp =
>>>> op->od->nbr->ports[i];
>>>> +                struct lport_addresses lrp_networks;
>>>> +                if (!extract_lrp_networks(lrp, &lrp_networks)) {
>>>> +                    continue;
>>>> +                }
>>>> +
>>>> +                for (int j = 0; j < lrp_networks.n_ipv4_addrs; j++) {
>>>> +                    if (!discard_arp_resolve) {
>>>> +                        break;
>>>> +                    }
>>>> +                    struct ipv4_netaddr ipv4 =
>>>> lrp_networks.ipv4_addrs[j];
>>>> +                    struct in6_addr ip =
>>>> in6_addr_mapped_ipv4(ipv4.addr);
>>>> +                    if (prefix_is_link_local(&ip, ipv4.plen)) {
>>>> +                        continue;
>>>> +                    }
>>>> +                    ds_put_format(match, "(ip4.dst == %s/%u) || ",
>>>> +                        ipv4.network_s, ipv4.plen);
>>>> +                }
>>>> +                for (int j = 0; j < lrp_networks.n_ipv6_addrs; j++) {
>>>> +                    if (!discard_nd_resolve) {
>>>> +                        break;
>>>> +                    }
>>>> +                    struct ipv6_netaddr ipv6 =
>>>> lrp_networks.ipv6_addrs[j];
>>>> +                    if (prefix_is_link_local(&ipv6.addr, ipv6.plen)) {
>>>> +                        continue;
>>>> +                    }
>>>> +                    ds_put_format(match, "(ip6.dst == %s/%u) || ",
>>>> +                        ipv6.network_s, ipv6.plen);
>>>> +                }
>>>> +                destroy_lport_addresses(&lrp_networks);
>>>> +            }
>>>> +
>>>> +            if (match->length > match_len) {
>>>> +                ds_truncate(match, match->length - 4);
>>>> +                ds_put_format(match, ")");
>>>> +                ovn_lflow_add_drop_with_desc(lflows, op->od,
>>>> +                    S_ROUTER_IN_ARP_RESOLVE, 50,
>>>> +                    ds_cstr(match), "No L2 unknown",
>>>> +                    lflow_ref);
>>>> +            }
>>>> +        }
>>>>      }
>>>>  }
>>>>
>>>> diff --git a/ovn-nb.xml b/ovn-nb.xml
>>>> index 73b5f213f..872741a2f 100644
>>>> --- a/ovn-nb.xml
>>>> +++ b/ovn-nb.xml
>>>> @@ -4499,6 +4499,19 @@ or
>>>>            routes in <code>ovn-ic</code> daemon.
>>>>          </p>
>>>>        </column>
>>>> +
>>>> +      <column name="options" key="disable_arp_resolve">
>>>> +        <p>
>>>> +          If set to <code>true</code>, disable get_arp for
>>>> +          known networks.
>>>> +        </p>
>>>> +      </column>
>>>> +      <column name="options" key="disable_nd_resolve">
>>>> +        <p>
>>>> +          If set to <code>true</code>, disable get_nd for
>>>> +          known networks.
>>>> +        </p>
>>>> +      </column>
>>>>      </group>
>>>>
>>>>      <group title="Attachment">
>>>> diff --git a/tests/ovn-northd.at b/tests/ovn-northd.at
>>>> index 5c9cc5cca..7c8237acd 100644
>>>> --- a/tests/ovn-northd.at
>>>> +++ b/tests/ovn-northd.at
>>>> @@ -10111,6 +10111,87 @@ AT_CHECK([grep -e "ls_in_arp_rsp" S1flows |
>>>> ovn_strip_lflows], [0], [dnl
>>>>  AT_CLEANUP
>>>>  ])
>>>>
>>>> +
>>>> +OVN_FOR_EACH_NORTHD_NO_HV([
>>>> +AT_SETUP([check options:disable_arp_resolve and
>>>> options:disable_nd_resolve for LRP])
>>>> +ovn_start NORTHD_TYPE
>>>> +check ovn-nbctl lr-add S1
>>>> +check ovn-nbctl --wait=sb lrp-add S1 S1-vm1  50:54:00:00:00:010
>>>> 192.168.0.10/24 fd00::2/64
>>>> +check ovn-nbctl --wait=sb lrp-set-gateway-chassis S1-vm1 chassis-1
>>>> +
>>>> +ovn-sbctl dump-flows S1 > S1flows
>>>> +AT_CAPTURE_FILE([S1flows])
>>>> +
>>>> +ovn-sbctl dump-flows S1 > S1flows
>>>> +AT_CAPTURE_FILE([S1flows])
>>>> +
>>>> +AT_CHECK([grep -e "lr_in_arp_resolve" S1flows | ovn_strip_lflows],
>>>> [0], [dnl
>>>> +  table=??(lr_in_arp_resolve  ), priority=0    , match=(1),
>>>> action=(drop;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=1    , match=(reg9[[9]] ==
>>>> 0), action=(get_nd(outport, xxreg0); next;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=1    , match=(reg9[[9]] ==
>>>> 1), action=(get_arp(outport, reg0); next;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=500  , match=(ip4.mcast ||
>>>> ip6.mcast), action=(next;)
>>>> +])
>>>> +
>>>> +
>>>> +# Set the disable_arp_resolve option and verify the flow
>>>> +check ovn-nbctl --wait=sb set logical_router_port S1-vm1
>>>> options:disable_arp_resolve=true
>>>> +
>>>> +ovn-sbctl dump-flows S1 > S1flows
>>>> +AT_CAPTURE_FILE([S1flows])
>>>> +
>>>> +AT_CHECK([grep -e "lr_in_arp_resolve" S1flows | ovn_strip_lflows],
>>>> [0], [dnl
>>>> +  table=??(lr_in_arp_resolve  ), priority=0    , match=(1),
>>>> action=(drop;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=1    , match=(reg9[[9]] ==
>>>> 0), action=(get_nd(outport, xxreg0); next;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=1    , match=(reg9[[9]] ==
>>>> 1), action=(get_arp(outport, reg0); next;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=50   , match=(inport ==
>>>> "S1-vm1" && is_chassis_resident("cr-S1-vm1") && ((ip4.dst ==
>>>> 192.168.0.0/24))), action=(drop;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=500  , match=(ip4.mcast ||
>>>> ip6.mcast), action=(next;)
>>>> +])
>>>> +
>>>> +check ovn-nbctl --wait=sb set logical_router_port S1-vm1
>>>> options:disable_nd_resolve=true
>>>> +
>>>> +ovn-sbctl dump-flows S1 > S1flows
>>>> +AT_CAPTURE_FILE([S1flows])
>>>> +
>>>> +AT_CHECK([grep -e "lr_in_arp_resolve" S1flows | ovn_strip_lflows],
>>>> [0], [dnl
>>>> +  table=??(lr_in_arp_resolve  ), priority=0    , match=(1),
>>>> action=(drop;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=1    , match=(reg9[[9]] ==
>>>> 0), action=(get_nd(outport, xxreg0); next;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=1    , match=(reg9[[9]] ==
>>>> 1), action=(get_arp(outport, reg0); next;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=50   , match=(inport ==
>>>> "S1-vm1" && is_chassis_resident("cr-S1-vm1") && ((ip4.dst ==
>>>> 192.168.0.0/24) || (ip6.dst == fd00::/64))), action=(drop;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=500  , match=(ip4.mcast ||
>>>> ip6.mcast), action=(next;)
>>>> +])
>>>> +
>>>> +# Remove lrp from chassis
>>>> +check ovn-nbctl --wait=sb lrp-del-gateway-chassis S1-vm1 chassis-1
>>>> +
>>>> +ovn-sbctl dump-flows S1 > S1flows
>>>> +AT_CAPTURE_FILE([S1flows])
>>>> +
>>>> +AT_CHECK([grep -e "lr_in_arp_resolve" S1flows | ovn_strip_lflows],
>>>> [0], [dnl
>>>> +  table=??(lr_in_arp_resolve  ), priority=0    , match=(1),
>>>> action=(drop;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=1    , match=(reg9[[9]] ==
>>>> 0), action=(get_nd(outport, xxreg0); next;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=1    , match=(reg9[[9]] ==
>>>> 1), action=(get_arp(outport, reg0); next;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=500  , match=(ip4.mcast ||
>>>> ip6.mcast), action=(next;)
>>>> +])
>>>> +
>>>> +check ovn-nbctl --wait=sb set logical_router_port S1-vm1
>>>> options:disable_arp_resolve=false
>>>> +check ovn-nbctl --wait=sb lrp-set-gateway-chassis S1-vm1 chassis-1
>>>> +
>>>> +ovn-sbctl dump-flows S1 > S1flows
>>>> +AT_CAPTURE_FILE([S1flows])
>>>> +
>>>> +AT_CHECK([grep -e "lr_in_arp_resolve" S1flows | ovn_strip_lflows],
>>>> [0], [dnl
>>>> +  table=??(lr_in_arp_resolve  ), priority=0    , match=(1),
>>>> action=(drop;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=1    , match=(reg9[[9]] ==
>>>> 0), action=(get_nd(outport, xxreg0); next;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=1    , match=(reg9[[9]] ==
>>>> 1), action=(get_arp(outport, reg0); next;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=50   , match=(inport ==
>>>> "S1-vm1" && is_chassis_resident("cr-S1-vm1") && ((ip6.dst == fd00::/64))),
>>>> action=(drop;)
>>>> +  table=??(lr_in_arp_resolve  ), priority=500  , match=(ip4.mcast ||
>>>> ip6.mcast), action=(next;)
>>>> +])
>>>> +
>>>> +
>>>> +AT_CLEANUP
>>>> +])
>>>> +
>>>> +
>>>>  OVN_FOR_EACH_NORTHD_NO_HV([
>>>>  AT_SETUP([Address set incremental processing])
>>>>  ovn_start
>>>> --
>>>> 2.43.0
>>>>
>>>>
>>>> --
>>>>
>>>>
>>>>
>>>>
>>>> _'Esta mensagem é direcionada apenas para os endereços constantes no
>>>> cabeçalho inicial. Se você não está listado nos endereços constantes no
>>>> cabeçalho, pedimos-lhe que desconsidere completamente o conteúdo dessa
>>>> mensagem e cuja cópia, encaminhamento e/ou execução das ações citadas
>>>> estão
>>>> imediatamente anuladas e proibidas'._
>>>>
>>>>
>>>> * **'Apesar do Magazine Luiza tomar
>>>> todas as precauções razoáveis para assegurar que nenhum vírus esteja
>>>> presente nesse e-mail, a empresa não poderá aceitar a responsabilidade
>>>> por
>>>> quaisquer perdas ou danos causados por esse e-mail ou por seus anexos'.*
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> dev mailing list
>>>> [email protected]
>>>> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
>>>>
>>>>
>>
>> *‘Esta mensagem é direcionada apenas para os endereços constantes no
>> cabeçalho inicial. Se você não está listado nos endereços constantes no
>> cabeçalho, pedimos-lhe que desconsidere completamente o conteúdo dessa
>> mensagem e cuja cópia, encaminhamento e/ou execução das ações citadas estão
>> imediatamente anuladas e proibidas’.*
>>
>>  *‘Apesar do Magazine Luiza tomar todas as precauções razoáveis para
>> assegurar que nenhum vírus esteja presente nesse e-mail, a empresa não
>> poderá aceitar a responsabilidade por quaisquer perdas ou danos causados
>> por esse e-mail ou por seus anexos’.*
>>
>

-- 




_‘Esta mensagem é direcionada apenas para os endereços constantes no 
cabeçalho inicial. Se você não está listado nos endereços constantes no 
cabeçalho, pedimos-lhe que desconsidere completamente o conteúdo dessa 
mensagem e cuja cópia, encaminhamento e/ou execução das ações citadas estão 
imediatamente anuladas e proibidas’._


* **‘Apesar do Magazine Luiza tomar 
todas as precauções razoáveis para assegurar que nenhum vírus esteja 
presente nesse e-mail, a empresa não poderá aceitar a responsabilidade por 
quaisquer perdas ou danos causados por esse e-mail ou por seus anexos’.*



_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev

Reply via email to