> On Wed, Nov 18, 2026 at 2:19 PM Lucas Vargas Dias <lucas.vdias at > magalu.cloud <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> > wrote: > > >/Ok, it makes sense to use an ACL or policy and it works very well for > >/>/static scenarios. />/However, both approaches need the CMS to keep a port > >group in sync with />/each subnet and to tie the lifecycle of the > >policies/ACLs to the subnet. />//>/However, I had other idea, propose a > >Logical_Router option instead: />/options:neigh_resolve_known_only=true > >/>//>/For each router port whose peer switch is eligible, northd adds a > >/>/flow that drops packets whose next hop is in the port's networks but > >/>/was resolved neither statically nor via MAC_Binding, e.g.: > >/>//>/table=lr_in_arp_request, priority=105, />/match=(eth.dst == > >00:00:00:00:00:00 && reg9[9] == 1 && />/outport == "lrp-subnet" && reg0 == > >192.168.30.0/24), />/action=(drop;) />//>/Static entries and learned > >MAC_Bindings never reach this flow. />/Router ports are skipped when the > >peer switch is a transit switch />/(interconn-ts) or has "remote", "unknown" > >or "localnet" ports. />/Router peers resolved dynamically > >(dynamic_neigh_routers) and />/virtual IPs on the subnet keep a priority 110 > >arp/nd_ns flow. />//>/Since the flows are derived from the router port > >networks and the />/switch ports, deleting or re-creating a subnet, with the > >same or a />/different CIDR, needs no extra configuration and leaves nothing > >/>/behind. The option is set once, when the router is created, like > >/>/dynamic_neigh_routers. />//>/What do you think? />//>/I can send the new > >patch. />/So, when someone from the community has time, they could review./ /HI Lucas and Ales!/
/Lucas, we’re have the same issues you described regarding arps to non-existent addresses, and I think your patch could be useful. If you post it, I’d like to test and review it—it might be good idea for us as well./ > //>//>/My main point is to have an easier way to fix it (inappropriate packet > />/consuming CPU). />/In my scenario, I have much more packets like this than > packets that > will />/generate an entry />/in the mac_binding table. />// > I see, I think it makes sense to send a new RFC patch and discuss it there. > > > >//>/Regards, />/Lucas />//>//>/Em qua., 18 de nov. de 2026 às 09:14, Ales > >Musil <amusil at > redhat.com <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> > />/escreveu: />//>>//>>//>>/On Wed, Nov 18, 2026 at 1:07 PM Lucas Vargas Dias > />>/<lucas.vdias at magalu.cloud > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> wrote: />>//>>>/Hi > Ales, how are you? />>>//>>//>>/Hi Lucas, />>//>>//>>>//>>>/Sorry, for > talking about this again. />>>//>>//>>/no worries. />>//>>//>>>//>>>/I'm > using dynamic_neigh_routers in my scenario, so copp could drop valid > />>>/packets. />>>/Or at least to have high latency to resolve the ARP. > />>>//>>//>>/This is indeed the downside of using CoPP. Looking back at the > thread />>/would it be feasible to create an ACL similar to the drop flow > proposed />>/by this patch? That still doesn't require a new option and > doesn't />>/have the CoPP downside. />>//>>/Thanks, />>/Ales > />>//>>>//>>>/Following my example, a logical flow like could works: > />>>/ovn-nbctl show lr13 />>>/router 3ee35ba1-605b-49cf-add4-9c0f2b521d84 > (lr13) />>>/port ts1001-lr13 />>>/mac: "12:00:00:d9:b5:d3" />>>/ipv6-lla: > "fe80::1000:ff:fed9:b5d3" />>>/networks: ["169.254.11.3/24"] />>>/port > rp13-bar />>>/mac: "00:01:ff:22:00:03" />>>/ipv6-lla: "fe80::201:ffff:fe22:3" > />>>/networks: ["192.168.30.1/24"] />>>//>>>//>>>/port ts1001-lr13 is used > for interconnect, rp13-bar is used for gw of />>>/subnet. />>>//>>>/I'm > thinking in something like: />>>/table=27(lr_in_arp_request), priority=105, > match=(eth.dst == />>>/00:00:00:00:00:00 && reg9[9] == 1 && outport == > "rp13-bar" && reg0 == />>>/192.168.30.0/24), action=(drop;) > />>>/table=27(lr_in_arp_request ), priority=100 , match=(eth.dst == > />>>/00:00:00:00:00:00 && reg9[9] == 0), action=(nd_ns { nd.target = xxreg0; > />>>/output; }; next;) />>>/table=27(lr_in_arp_request ), priority=100 , > match=(eth.dst == />>>/00:00:00:00:00:00 && reg9[9] == 1), action=(arp { > eth.dst = />>>/ff:ff:ff:ff:ff:ff; arp.spa = reg5; arp.tpa = reg0; arp.op = 1; > output; }; />>>/next;) />>>/table=27(lr_in_arp_request ), priority=0 , > match=(1), />>>/action=(next;) />>>//>>>/I'll apply a config in rp13-bar (I'm > still thinking of a good name for />>>/config), and with config ovn-northd > will generate lflow with prio 105. />>>//>>>/Does it make sense? > />>>//>>>/Regards, />>>/Lucas />>>//>>>//>>>//>>>/Em qui., 4 de dez. de 2025 > às 09:43, Ales Musil <amusil at redhat.com > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> />>>/escreveu: > />>>//>>>>//>>>>//>>>>/On Thu, Dec 4, 2025 at 1:40 PM Lucas Vargas Dias < > />>>>/lucas.vdias at luizalabs.com > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> wrote: > />>>>//>>>>>/Hi, />>>>>//>>>>>/We're testing the CoPP, in the first tests, it > works correctly. />>>>>//>>>>>/I agree about avoiding new options. > />>>>>//>>>>>//>>>>>/Regards, />>>>>/Lucas />>>>>//>>>>//>>>>/Thank you, > />>>>//>>>>/based on that I'll mark the series as deferred for now. > />>>>//>>>>/Regards, />>>>/Ales />>>>//>>>>//>>>>>//>>>>>/Em sex., 28 de nov. > de 2025 às 07:29, Ales Musil <amusil at > redhat.com <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> > />>>>>/escreveu: />>>>>//>>>>>>//>>>>>>//>>>>>>/On Mon, Oct 27, 2025 at 9:21 > PM Lucas Vargas Dias via dev < />>>>>>/ovs-dev at openvswitch.org > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> wrote: > />>>>>>//>>>>>>>/Consider the following scenario: />>>>>>>/(192.168.10.10/24) > VM1 -> LS -> LR -> TS -> LR -> LS -> VM2 ( />>>>>>>/192.168.20.20/24) > />>>>>>>//>>>>>>>/Also, LSPs from LS have the addresses configured, it's not > used />>>>>>>/unknown addresses />>>>>>>/in this case. />>>>>>>//>>>>>>>/Ping > from VM1 to VM2 works correctly, it's ok. But, if VM1 try to />>>>>>>/flood, > />>>>>>>/for example the IP 192.168.20.30 (an innexistent LSP), we'll see a > />>>>>>>/high CPU load in />>>>>>>/ovn-controller from the network > destination due to the get_arp />>>>>>>/function. />>>>>>>/For this case, > ovn-controller have ovn-is-interconn = true. />>>>>>>//>>>>>>>/In the > connection LR -> TS -> LR all addresses are known, so arp />>>>>>>/resolve > />>>>>>>/could be disable. For this case, add the option > />>>>>>>/disable_arp_resolve=true />>>>>>>/to logical_router_port drop the > packets for unknown addresses. If the />>>>>>>/communication is IPv6, > configure the option disable_nd_resolve=true. > />>>>>>>//>>>>>>>//>>>>>>>/Co-authored-by: Tiago Matos Carvalho Reis > <tiago.reis at > luizalabs.com <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> > />>>>>>>/Signed-off-by: Tiago Matos Carvalho Reis <tiago.reis at > luizalabs.com > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> > />>>>>>>/Signed-off-by: Lucas Vargas Dias <lucas.vdias at luizalabs.com > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> />>>>>>>/--- > />>>>>>>//>>>>>>//>>>>>>/Hi Lucas, />>>>>>//>>>>>>/sorry for the late > response, but I have to agree with Lorenzo and />>>>>>/Alexander on this. > Both of them mentioned CoPP as a solution which />>>>>>/makes sense > considering the problem seems to be high ovn-controller />>>>>>/CPU usage in > pinctrl. And it makes me wonder if there is any reason />>>>>>/why couldn't > CoPP be used? It was built exactly for this to limit />>>>>>/the traffic > towards userspace, to protect the control plane. />>>>>>//>>>>>>/There might > be another solution, that is ACLs. Would that be />>>>>>/feasible in any > capacity for you to create ACLs that would block />>>>>>/this traffic? As you > said in your case those IPs are known I think />>>>>>/it should be possible > to create ACL drop flow based on those IPs. />>>>>>//>>>>>>/While there isn't > technically anything wrong with the option, />>>>>>/it's the fact that we > would be adding another option. I would />>>>>>/love to avoid that if > possible, especially if any of the solutions />>>>>>/above would work. My bet > would be on the CoPP, because as I said, />>>>>>/it's specifically made for > those scenarios. />>>>>>//>>>>>>/Please let me know what you think. > />>>>>>//>>>>>>/Thanks, />>>>>>/Ales />>>>>>//>>>>>>//>>>>>>>/northd/northd.c > | 54 ++++++++++++++++++++++++++++++ />>>>>>>/ovn-nb.xml | 13 ++++++++ > />>>>>>>/tests/ovn-northd.at | 81 > />>>>>>>/+++++++++++++++++++++++++++++++++++++++++++++ />>>>>>>/3 files > changed, 148 insertions(+) />>>>>>>//>>>>>>>/diff --git a/northd/northd.c > b/northd/northd.c />>>>>>>/index 9da995cea..356dbaa94 100644 />>>>>>>/--- > a/northd/northd.c />>>>>>>/+++ b/northd/northd.c />>>>>>>/@@ -14940,6 > +14940,60 @@ build_arp_resolve_flows_for_lrp(struct />>>>>>>/ovn_port *op, > />>>>>>>/&op->nbrp->header_, />>>>>>>/lflow_ref); />>>>>>>/} />>>>>>>/+ > />>>>>>>/+ bool discard_arp_resolve = smap_get_bool(&op->nbrp->options, > />>>>>>>/+ "disable_arp_resolve", false); />>>>>>>/+ bool discard_nd_resolve > = smap_get_bool(&op->nbrp->options, />>>>>>>/+ "disable_nd_resolve", false); > />>>>>>>/+ if (discard_arp_resolve || discard_nd_resolve) { />>>>>>>/+ > ds_clear(match); />>>>>>>/+ />>>>>>>/+ ds_put_format(match, "inport == %s && > />>>>>>>/is_chassis_resident(%s) && " />>>>>>>/+ "(", op->json_key, > op->cr_port->json_key); />>>>>>>/+ />>>>>>>/+ size_t match_len = > match->length; />>>>>>>/+ for (size_t i = 0; i < op->od->nbr->n_ports; i++) { > />>>>>>>/+ struct nbrec_logical_router_port *lrp = > />>>>>>>/op->od->nbr->ports[i]; />>>>>>>/+ struct lport_addresses > lrp_networks; />>>>>>>/+ if (!extract_lrp_networks(lrp, &lrp_networks)) { > />>>>>>>/+ continue; />>>>>>>/+ } />>>>>>>/+ />>>>>>>/+ for (int j = 0; j < > lrp_networks.n_ipv4_addrs; j++) />>>>>>>/{ />>>>>>>/+ if > (!discard_arp_resolve) { />>>>>>>/+ break; />>>>>>>/+ } />>>>>>>/+ struct > ipv4_netaddr ipv4 = />>>>>>>/lrp_networks.ipv4_addrs[j]; />>>>>>>/+ struct > in6_addr ip = />>>>>>>/in6_addr_mapped_ipv4(ipv4.addr); />>>>>>>/+ if > (prefix_is_link_local(&ip, ipv4.plen)) { />>>>>>>/+ continue; />>>>>>>/+ } > />>>>>>>/+ ds_put_format(match, "(ip4.dst == %s/%u) || ", />>>>>>>/+ > ipv4.network_s, ipv4.plen); />>>>>>>/+ } />>>>>>>/+ for (int j = 0; j < > lrp_networks.n_ipv6_addrs; j++) />>>>>>>/{ />>>>>>>/+ if > (!discard_nd_resolve) { />>>>>>>/+ break; />>>>>>>/+ } />>>>>>>/+ struct > ipv6_netaddr ipv6 = />>>>>>>/lrp_networks.ipv6_addrs[j]; />>>>>>>/+ if > (prefix_is_link_local(&ipv6.addr, />>>>>>>/ipv6.plen)) { />>>>>>>/+ continue; > />>>>>>>/+ } />>>>>>>/+ ds_put_format(match, "(ip6.dst == %s/%u) || ", > />>>>>>>/+ ipv6.network_s, ipv6.plen); />>>>>>>/+ } />>>>>>>/+ > destroy_lport_addresses(&lrp_networks); />>>>>>>/+ } />>>>>>>/+ />>>>>>>/+ if > (match->length > match_len) { />>>>>>>/+ ds_truncate(match, match->length - > 4); />>>>>>>/+ ds_put_format(match, ")"); />>>>>>>/+ > ovn_lflow_add_drop_with_desc(lflows, op->od, />>>>>>>/+ > S_ROUTER_IN_ARP_RESOLVE, 50, />>>>>>>/+ ds_cstr(match), "No L2 unknown", > />>>>>>>/+ lflow_ref); />>>>>>>/+ } />>>>>>>/+ } />>>>>>>/} />>>>>>>/} > />>>>>>>//>>>>>>>/diff --git a/ovn-nb.xml b/ovn-nb.xml />>>>>>>/index > 73b5f213f..872741a2f 100644 />>>>>>>/--- a/ovn-nb.xml />>>>>>>/+++ > b/ovn-nb.xml />>>>>>>/@@ -4499,6 +4499,19 @@ or />>>>>>>/routes in > <code>ovn-ic</code> daemon. />>>>>>>/</p> />>>>>>>/</column> />>>>>>>/+ > />>>>>>>/+ <column name="options" key="disable_arp_resolve"> />>>>>>>/+ <p> > />>>>>>>/+ If set to <code>true</code>, disable get_arp for />>>>>>>/+ known > networks. />>>>>>>/+ </p> />>>>>>>/+ </column> />>>>>>>/+ <column > name="options" key="disable_nd_resolve"> />>>>>>>/+ <p> />>>>>>>/+ If set to > <code>true</code>, disable get_nd for />>>>>>>/+ known networks. />>>>>>>/+ > </p> />>>>>>>/+ </column> />>>>>>>/</group> />>>>>>>//>>>>>>>/<group > title="Attachment"> />>>>>>>/diff --git a/tests/ovn-northd.at > b/tests/ovn-northd.at />>>>>>>/index 5c9cc5cca..7c8237acd 100644 />>>>>>>/--- > a/tests/ovn-northd.at />>>>>>>/+++ b/tests/ovn-northd.at />>>>>>>/@@ -10111,6 > +10111,87 @@ AT_CHECK([grep -e "ls_in_arp_rsp" S1flows | > />>>>>>>/ovn_strip_lflows], [0], [dnl />>>>>>>/AT_CLEANUP />>>>>>>/]) > />>>>>>>//>>>>>>>/+ />>>>>>>/+OVN_FOR_EACH_NORTHD_NO_HV([ > />>>>>>>/+AT_SETUP([check options:disable_arp_resolve and > />>>>>>>/options:disable_nd_resolve for LRP]) />>>>>>>/+ovn_start NORTHD_TYPE > />>>>>>>/+check ovn-nbctl lr-add S1 />>>>>>>/+check ovn-nbctl --wait=sb > lrp-add S1 S1-vm1 50:54:00:00:00:010 />>>>>>>/192.168.0.10/24 fd00::2/64 > />>>>>>>/+check ovn-nbctl --wait=sb lrp-set-gateway-chassis S1-vm1 chassis-1 > />>>>>>>/+ />>>>>>>/+ovn-sbctl dump-flows S1 > S1flows > />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+ />>>>>>>/+ovn-sbctl > dump-flows S1 > S1flows />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+ > />>>>>>>/+AT_CHECK([grep -e "lr_in_arp_resolve" S1flows | ovn_strip_lflows], > />>>>>>>/[0], [dnl />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=0 , > match=(1), />>>>>>>/action=(drop;) />>>>>>>/+ table=??(lr_in_arp_resolve ), > priority=1 , match=(reg9[[9]] />>>>>>>/== 0), action=(get_nd(outport, > xxreg0); next;) />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=1 , > match=(reg9[[9]] />>>>>>>/== 1), action=(get_arp(outport, reg0); next;) > />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=500 , match=(ip4.mcast > />>>>>>>/|| ip6.mcast), action=(next;) />>>>>>>/+]) />>>>>>>/+ />>>>>>>/+ > />>>>>>>/+# Set the disable_arp_resolve option and verify the flow > />>>>>>>/+check ovn-nbctl --wait=sb set logical_router_port S1-vm1 > />>>>>>>/options:disable_arp_resolve=true />>>>>>>/+ />>>>>>>/+ovn-sbctl > dump-flows S1 > S1flows />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+ > />>>>>>>/+AT_CHECK([grep -e "lr_in_arp_resolve" S1flows | ovn_strip_lflows], > />>>>>>>/[0], [dnl />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=0 , > match=(1), />>>>>>>/action=(drop;) />>>>>>>/+ table=??(lr_in_arp_resolve ), > priority=1 , match=(reg9[[9]] />>>>>>>/== 0), action=(get_nd(outport, > xxreg0); next;) />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=1 , > match=(reg9[[9]] />>>>>>>/== 1), action=(get_arp(outport, reg0); next;) > />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=50 , match=(inport == > />>>>>>>/"S1-vm1" && is_chassis_resident("cr-S1-vm1") && ((ip4.dst == > />>>>>>>/192.168.0.0/24))), action=(drop;) />>>>>>>/+ > table=??(lr_in_arp_resolve ), priority=500 , match=(ip4.mcast />>>>>>>/|| > ip6.mcast), action=(next;) />>>>>>>/+]) />>>>>>>/+ />>>>>>>/+check ovn-nbctl > --wait=sb set logical_router_port S1-vm1 > />>>>>>>/options:disable_nd_resolve=true />>>>>>>/+ />>>>>>>/+ovn-sbctl > dump-flows S1 > S1flows />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+ > />>>>>>>/+AT_CHECK([grep -e "lr_in_arp_resolve" S1flows | ovn_strip_lflows], > />>>>>>>/[0], [dnl />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=0 , > match=(1), />>>>>>>/action=(drop;) />>>>>>>/+ table=??(lr_in_arp_resolve ), > priority=1 , match=(reg9[[9]] />>>>>>>/== 0), action=(get_nd(outport, > xxreg0); next;) />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=1 , > match=(reg9[[9]] />>>>>>>/== 1), action=(get_arp(outport, reg0); next;) > />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=50 , match=(inport == > />>>>>>>/"S1-vm1" && is_chassis_resident("cr-S1-vm1") && ((ip4.dst == > />>>>>>>/192.168.0.0/24) || (ip6.dst == fd00::/64))), action=(drop;) > />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=500 , match=(ip4.mcast > />>>>>>>/|| ip6.mcast), action=(next;) />>>>>>>/+]) />>>>>>>/+ />>>>>>>/+# > Remove lrp from chassis />>>>>>>/+check ovn-nbctl --wait=sb > lrp-del-gateway-chassis S1-vm1 chassis-1 />>>>>>>/+ />>>>>>>/+ovn-sbctl > dump-flows S1 > S1flows />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+ > />>>>>>>/+AT_CHECK([grep -e "lr_in_arp_resolve" S1flows | ovn_strip_lflows], > />>>>>>>/[0], [dnl />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=0 , > match=(1), />>>>>>>/action=(drop;) />>>>>>>/+ table=??(lr_in_arp_resolve ), > priority=1 , match=(reg9[[9]] />>>>>>>/== 0), action=(get_nd(outport, > xxreg0); next;) />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=1 , > match=(reg9[[9]] />>>>>>>/== 1), action=(get_arp(outport, reg0); next;) > />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=500 , match=(ip4.mcast > />>>>>>>/|| ip6.mcast), action=(next;) />>>>>>>/+]) />>>>>>>/+ > />>>>>>>/+check ovn-nbctl --wait=sb set logical_router_port S1-vm1 > />>>>>>>/options:disable_arp_resolve=false />>>>>>>/+check ovn-nbctl > --wait=sb lrp-set-gateway-chassis S1-vm1 chassis-1 />>>>>>>/+ > />>>>>>>/+ovn-sbctl dump-flows S1 > S1flows > />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+ />>>>>>>/+AT_CHECK([grep -e > "lr_in_arp_resolve" S1flows | ovn_strip_lflows], />>>>>>>/[0], [dnl > />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=0 , match=(1), > />>>>>>>/action=(drop;) />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=1 , > match=(reg9[[9]] />>>>>>>/== 0), action=(get_nd(outport, xxreg0); next;) > />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=1 , match=(reg9[[9]] > />>>>>>>/== 1), action=(get_arp(outport, reg0); next;) />>>>>>>/+ > table=??(lr_in_arp_resolve ), priority=50 , match=(inport == > />>>>>>>/"S1-vm1" && is_chassis_resident("cr-S1-vm1") && ((ip6.dst == > fd00::/64))), />>>>>>>/action=(drop;) />>>>>>>/+ table=??(lr_in_arp_resolve > ), priority=500 , match=(ip4.mcast />>>>>>>/|| ip6.mcast), action=(next;) > />>>>>>>/+]) />>>>>>>/+ />>>>>>>/+ />>>>>>>/+AT_CLEANUP />>>>>>>/+]) > />>>>>>>/+ />>>>>>>/+ />>>>>>>/OVN_FOR_EACH_NORTHD_NO_HV([ > />>>>>>>/AT_SETUP([Address set incremental processing]) />>>>>>>/ovn_start > />>>>>>>/-- />>>>>>>/2.43.0 />>>>>>>//>>>>>>>//>>>>>>>/-- > />>>>>>>//>>>>>>>//>>>>>>>//>>>>>>>//>>>>>>>/_'Esta mensagem é direcionada > apenas para os endereços constantes no />>>>>>>/cabeçalho inicial. Se você > não está listado nos endereços constantes />>>>>>>/no />>>>>>>/cabeçalho, > pedimos-lhe que desconsidere completamente o conteúdo />>>>>>>/dessa > />>>>>>>/mensagem e cuja cópia, encaminhamento e/ou execução das ações > />>>>>>>/citadas estão />>>>>>>/imediatamente anuladas e proibidas'._ > />>>>>>>//>>>>>>>//>>>>>>>/* **'Apesar do Magazine Luiza tomar />>>>>>>/todas > as precauções razoáveis para assegurar que nenhum vírus esteja > />>>>>>>/presente nesse e-mail, a empresa não poderá aceitar a > />>>>>>>/responsabilidade por />>>>>>>/quaisquer perdas ou danos causados por > esse e-mail ou por seus />>>>>>>/anexos'.* > />>>>>>>//>>>>>>>//>>>>>>>//>>>>>>>/_______________________________________________ > />>>>>>>/dev mailing list />>>>>>>/dev at openvswitch.org > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev> > />>>>>>>/https://mail.openvswitch.org/mailman/listinfo/ovs-dev > />>>>>>>//>>>>>>>//>>>>>//>>>>>/*‘Esta mensagem é direcionada apenas para os > endereços constantes no />>>>>/cabeçalho inicial. Se você não está listado > nos endereços constantes no />>>>>/cabeçalho, pedimos-lhe que desconsidere > completamente o conteúdo dessa />>>>>/mensagem e cuja cópia, encaminhamento > e/ou execução das ações citadas > estão />>>>>/imediatamente anuladas e proibidas’.* />>>>>//>>>>>/*‘Apesar do > Magazine Luiza tomar todas as precauções razoáveis para />>>>>/assegurar que > nenhum vírus esteja presente nesse e-mail, a empresa não />>>>>/poderá > aceitar a responsabilidade por quaisquer perdas ou danos causados />>>>>/por > esse e-mail ou por seus anexos’.* />>>>>//>>>>//>>>//>>>/*‘Esta mensagem é > direcionada apenas para os endereços constantes no />>>/cabeçalho inicial. Se > você não está listado nos endereços constantes no />>>/cabeçalho, pedimos-lhe > que desconsidere completamente o conteúdo dessa />>>/mensagem e cuja cópia, > encaminhamento e/ou execução das ações citadas > estão />>>/imediatamente anuladas e proibidas’.* />>>//>>>/*‘Apesar do > Magazine Luiza tomar todas as precauções razoáveis para />>>/assegurar que > nenhum vírus esteja presente nesse e-mail, a empresa não />>>/poderá aceitar > a responsabilidade por quaisquer perdas ou danos causados />>>/por esse > e-mail ou por seus anexos’.* />>>//>>//>//>/*‘Esta mensagem é direcionada > apenas para os endereços constantes no />/cabeçalho inicial. Se você não está > listado nos endereços constantes no />/cabeçalho, pedimos-lhe que > desconsidere completamente o conteúdo dessa />/mensagem e cuja cópia, > encaminhamento e/ou execução das ações citadas > estão />/imediatamente anuladas e proibidas’.* />//>/*‘Apesar do Magazine > Luiza tomar todas as precauções razoáveis para />/assegurar que nenhum vírus > esteja presente nesse e-mail, a empresa não />/poderá aceitar a > responsabilidade por quaisquer perdas ou danos causados />/por esse e-mail ou > por seus anexos’.* />// _______________________________________________ dev mailing list [email protected] https://mail.openvswitch.org/mailman/listinfo/ovs-dev
