Hi Sasha,

I sent the patch for you to test.

Regards,
Lucas

Em qua., 18 de nov. de 2026 às 13:15, Rukomoinikova Aleksandra
<[email protected]> escreveu:

> > On Wed, Nov 18, 2026 at 2:19 PM Lucas Vargas Dias <lucas.vdias at
> magalu.cloud <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>>
> > wrote:
> >
> > >/Ok, it makes sense to use an ACL or policy and it works very well for
> />/static scenarios. />/However, both approaches need the CMS to keep a
> port group in sync with />/each subnet and to tie the lifecycle of the
> policies/ACLs to the subnet. />//>/However, I had other idea, propose a
> Logical_Router option instead: />/options:neigh_resolve_known_only=true
> />//>/For each router port whose peer switch is eligible, northd adds a
> />/flow that drops packets whose next hop is in the port's networks but
> />/was resolved neither statically nor via MAC_Binding, e.g.:
> />//>/table=lr_in_arp_request, priority=105, />/match=(eth.dst ==
> 00:00:00:00:00:00 && reg9[9] == 1 && />/outport == "lrp-subnet" && reg0 ==
> 192.168.30.0/24), />/action=(drop;) />//>/Static entries and learned
> MAC_Bindings never reach this flow. />/Router ports are skipped when the
> peer switch is a transit switch />/(interconn-ts) or has "remote",
> "unknown" or "localnet" ports. />/Router peers resolved dynamically
> (dynamic_neigh_routers) and />/virtual IPs on the subnet keep a priority
> 110 arp/nd_ns flow. />//>/Since the flows are derived from the router port
> networks and the />/switch ports, deleting or re-creating a subnet, with
> the same or a />/different CIDR, needs no extra configuration and leaves
> nothing />/behind. The option is set once, when the router is created, like
> />/dynamic_neigh_routers. />//>/What do you think? />//>/I can send the new
> patch. />/So, when someone from the community has time, they could review./
> /HI Lucas and Ales!/
>
> /Lucas, we’re have the same issues you described regarding arps to
> non-existent addresses, and I think your patch could be useful. If you
> post it, I’d like to test and review it—it might be good idea for us as
> well./
>
> > //>//>/My main point is to have an easier way to fix it (inappropriate
> packet />/consuming CPU). />/In my scenario, I have much more packets like
> this than packets that
> > will />/generate an entry />/in the mac_binding table. />//
> > I see, I think it makes sense to send a new RFC patch and discuss it
> there.
> >
> >
> > >//>/Regards, />/Lucas />//>//>/Em qua., 18 de nov. de 2026 às 09:14,
> Ales Musil <amusil at
> > redhat.com <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>>
> />/escreveu: />//>>//>>//>>/On Wed, Nov 18, 2026 at 1:07 PM Lucas Vargas
> Dias />>/<lucas.vdias at magalu.cloud
> > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> wrote:
> />>//>>>/Hi Ales, how are you? />>>//>>//>>/Hi Lucas,
> />>//>>//>>>//>>>/Sorry, for talking about this again. />>>//>>//>>/no
> worries. />>//>>//>>>//>>>/I'm using dynamic_neigh_routers in my scenario,
> so copp could drop valid />>>/packets. />>>/Or at least to have high
> latency to resolve the ARP. />>>//>>//>>/This is indeed the downside of
> using CoPP. Looking back at the thread />>/would it be feasible to create
> an ACL similar to the drop flow proposed />>/by this patch? That still
> doesn't require a new option and doesn't />>/have the CoPP downside.
> />>//>>/Thanks, />>/Ales />>//>>>//>>>/Following my example, a logical flow
> like could works: />>>/ovn-nbctl show lr13 />>>/router
> 3ee35ba1-605b-49cf-add4-9c0f2b521d84 (lr13) />>>/port ts1001-lr13 />>>/mac:
> "12:00:00:d9:b5:d3" />>>/ipv6-lla: "fe80::1000:ff:fed9:b5d3" />>>/networks:
> ["169.254.11.3/24"] />>>/port rp13-bar />>>/mac: "00:01:ff:22:00:03"
> />>>/ipv6-lla: "fe80::201:ffff:fe22:3" />>>/networks: ["192.168.30.1/24"]
> />>>//>>>//>>>/port ts1001-lr13 is used for interconnect, rp13-bar is used
> for gw of />>>/subnet. />>>//>>>/I'm thinking in something like:
> />>>/table=27(lr_in_arp_request), priority=105, match=(eth.dst ==
> />>>/00:00:00:00:00:00 && reg9[9] == 1 && outport == "rp13-bar" && reg0 ==
> />>>/192.168.30.0/24), action=(drop;) />>>/table=27(lr_in_arp_request ),
> priority=100 , match=(eth.dst == />>>/00:00:00:00:00:00 && reg9[9] == 0),
> action=(nd_ns { nd.target = xxreg0; />>>/output; }; next;)
> />>>/table=27(lr_in_arp_request ), priority=100 , match=(eth.dst ==
> />>>/00:00:00:00:00:00 && reg9[9] == 1), action=(arp { eth.dst =
> />>>/ff:ff:ff:ff:ff:ff; arp.spa = reg5; arp.tpa = reg0; arp.op = 1;
> > output; }; />>>/next;) />>>/table=27(lr_in_arp_request ), priority=0 ,
> match=(1), />>>/action=(next;) />>>//>>>/I'll apply a config in rp13-bar
> (I'm still thinking of a good name for />>>/config), and with config
> ovn-northd will generate lflow with prio 105. />>>//>>>/Does it make sense?
> />>>//>>>/Regards, />>>/Lucas />>>//>>>//>>>//>>>/Em qui., 4 de dez. de
> 2025 às 09:43, Ales Musil <amusil at redhat.com
> > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> />>>/escreveu:
> />>>//>>>>//>>>>//>>>>/On Thu, Dec 4, 2025 at 1:40 PM Lucas Vargas Dias <
> />>>>/lucas.vdias at luizalabs.com
> > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> wrote:
> />>>>//>>>>>/Hi, />>>>>//>>>>>/We're testing the CoPP, in the first tests,
> it works correctly. />>>>>//>>>>>/I agree about avoiding new options.
> />>>>>//>>>>>//>>>>>/Regards, />>>>>/Lucas />>>>>//>>>>//>>>>/Thank you,
> />>>>//>>>>/based on that I'll mark the series as deferred for now.
> />>>>//>>>>/Regards, />>>>/Ales />>>>//>>>>//>>>>>//>>>>>/Em sex., 28 de
> nov. de 2025 às 07:29, Ales Musil <amusil at
> > redhat.com <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>>
> />>>>>/escreveu: />>>>>//>>>>>>//>>>>>>//>>>>>>/On Mon, Oct 27, 2025 at
> 9:21 PM Lucas Vargas Dias via dev < />>>>>>/ovs-dev at openvswitch.org
> > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> wrote:
> />>>>>>//>>>>>>>/Consider the following scenario: />>>>>>>/(
> 192.168.10.10/24) VM1 -> LS -> LR -> TS -> LR -> LS -> VM2 ( />>>>>>>/
> 192.168.20.20/24) />>>>>>>//>>>>>>>/Also, LSPs from LS have the addresses
> configured, it's not used />>>>>>>/unknown addresses />>>>>>>/in this case.
> />>>>>>>//>>>>>>>/Ping from VM1 to VM2 works correctly, it's ok. But, if
> VM1 try to />>>>>>>/flood, />>>>>>>/for example the IP 192.168.20.30 (an
> innexistent LSP), we'll see a />>>>>>>/high CPU load in
> />>>>>>>/ovn-controller from the network destination due to the get_arp
> />>>>>>>/function. />>>>>>>/For this case, ovn-controller have
> ovn-is-interconn = true. />>>>>>>//>>>>>>>/In the connection LR -> TS -> LR
> all addresses are known, so arp />>>>>>>/resolve />>>>>>>/could be disable.
> For this case, add the option />>>>>>>/disable_arp_resolve=true />>>>>>>/to
> logical_router_port drop the packets for unknown addresses. If the
> />>>>>>>/communication is IPv6, configure the option
> disable_nd_resolve=true. />>>>>>>//>>>>>>>//>>>>>>>/Co-authored-by: Tiago
> Matos Carvalho Reis <tiago.reis at
> > luizalabs.com <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>>
> />>>>>>>/Signed-off-by: Tiago Matos Carvalho Reis <tiago.reis at
> luizalabs.com
> > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>>
> />>>>>>>/Signed-off-by: Lucas Vargas Dias <lucas.vdias at luizalabs.com
> > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev>> />>>>>>>/---
> />>>>>>>//>>>>>>//>>>>>>/Hi Lucas, />>>>>>//>>>>>>/sorry for the late
> response, but I have to agree with Lorenzo and />>>>>>/Alexander on this.
> Both of them mentioned CoPP as a solution which />>>>>>/makes sense
> considering the problem seems to be high ovn-controller />>>>>>/CPU usage
> in pinctrl. And it makes me wonder if there is any reason />>>>>>/why
> couldn't CoPP be used? It was built exactly for this to limit />>>>>>/the
> traffic towards userspace, to protect the control plane.
> />>>>>>//>>>>>>/There might be another solution, that is ACLs. Would that
> be />>>>>>/feasible in any capacity for you to create ACLs that would block
> />>>>>>/this traffic? As you said in your case those IPs are known I think
> />>>>>>/it should be possible to create ACL drop flow based on those IPs.
> />>>>>>//>>>>>>/While there isn't technically anything wrong with the
> option, />>>>>>/it's the fact that we would be adding another option. I
> would />>>>>>/love to avoid that if possible, especially if any of the
> solutions />>>>>>/above would work. My bet would be on the CoPP, because as
> I said, />>>>>>/it's specifically made for those scenarios.
> />>>>>>//>>>>>>/Please let me know what you think. />>>>>>//>>>>>>/Thanks,
> />>>>>>/Ales />>>>>>//>>>>>>//>>>>>>>/northd/northd.c | 54
> ++++++++++++++++++++++++++++++ />>>>>>>/ovn-nb.xml | 13 ++++++++
> />>>>>>>/tests/ovn-northd.at | 81
> />>>>>>>/+++++++++++++++++++++++++++++++++++++++++++++ />>>>>>>/3 files
> changed, 148 insertions(+) />>>>>>>//>>>>>>>/diff --git a/northd/northd.c
> b/northd/northd.c />>>>>>>/index 9da995cea..356dbaa94 100644 />>>>>>>/---
> a/northd/northd.c />>>>>>>/+++ b/northd/northd.c />>>>>>>/@@ -14940,6
> +14940,60 @@ build_arp_resolve_flows_for_lrp(struct />>>>>>>/ovn_port *op,
> />>>>>>>/&op->nbrp->header_, />>>>>>>/lflow_ref); />>>>>>>/} />>>>>>>/+
> />>>>>>>/+ bool discard_arp_resolve = smap_get_bool(&op->nbrp->options,
> />>>>>>>/+ "disable_arp_resolve", false); />>>>>>>/+ bool
> discard_nd_resolve = smap_get_bool(&op->nbrp->options, />>>>>>>/+
> "disable_nd_resolve", false); />>>>>>>/+ if (discard_arp_resolve ||
> discard_nd_resolve) { />>>>>>>/+ ds_clear(match); />>>>>>>/+ />>>>>>>/+
> ds_put_format(match, "inport == %s && />>>>>>>/is_chassis_resident(%s) && "
> />>>>>>>/+ "(", op->json_key, op->cr_port->json_key); />>>>>>>/+ />>>>>>>/+
> size_t match_len = match->length; />>>>>>>/+ for (size_t i = 0; i <
> op->od->nbr->n_ports; i++) { />>>>>>>/+ struct nbrec_logical_router_port
> *lrp = />>>>>>>/op->od->nbr->ports[i]; />>>>>>>/+ struct lport_addresses
> lrp_networks; />>>>>>>/+ if (!extract_lrp_networks(lrp, &lrp_networks)) {
> />>>>>>>/+ continue; />>>>>>>/+ } />>>>>>>/+ />>>>>>>/+ for (int j = 0; j <
> lrp_networks.n_ipv4_addrs; j++) />>>>>>>/{ />>>>>>>/+ if
> (!discard_arp_resolve) { />>>>>>>/+ break; />>>>>>>/+ } />>>>>>>/+ struct
> ipv4_netaddr ipv4 = />>>>>>>/lrp_networks.ipv4_addrs[j]; />>>>>>>/+ struct
> in6_addr ip = />>>>>>>/in6_addr_mapped_ipv4(ipv4.addr); />>>>>>>/+ if
> (prefix_is_link_local(&ip, ipv4.plen)) { />>>>>>>/+ continue; />>>>>>>/+ }
> />>>>>>>/+ ds_put_format(match, "(ip4.dst == %s/%u) || ", />>>>>>>/+
> ipv4.network_s, ipv4.plen); />>>>>>>/+ } />>>>>>>/+ for (int j = 0; j <
> lrp_networks.n_ipv6_addrs; j++) />>>>>>>/{ />>>>>>>/+ if
> (!discard_nd_resolve) { />>>>>>>/+ break; />>>>>>>/+ } />>>>>>>/+ struct
> ipv6_netaddr ipv6 = />>>>>>>/lrp_networks.ipv6_addrs[j]; />>>>>>>/+ if
> (prefix_is_link_local(&ipv6.addr, />>>>>>>/ipv6.plen)) { />>>>>>>/+
> continue; />>>>>>>/+ } />>>>>>>/+ ds_put_format(match, "(ip6.dst == %s/%u)
> || ", />>>>>>>/+ ipv6.network_s, ipv6.plen); />>>>>>>/+ } />>>>>>>/+
> destroy_lport_addresses(&lrp_networks); />>>>>>>/+ } />>>>>>>/+ />>>>>>>/+
> if (match->length > match_len) { />>>>>>>/+ ds_truncate(match,
> match->length - 4); />>>>>>>/+ ds_put_format(match, ")"); />>>>>>>/+
> ovn_lflow_add_drop_with_desc(lflows, op->od, />>>>>>>/+
> S_ROUTER_IN_ARP_RESOLVE, 50, />>>>>>>/+ ds_cstr(match), "No L2 unknown",
> />>>>>>>/+ lflow_ref); />>>>>>>/+ } />>>>>>>/+ } />>>>>>>/} />>>>>>>/}
> />>>>>>>//>>>>>>>/diff --git a/ovn-nb.xml b/ovn-nb.xml />>>>>>>/index
> 73b5f213f..872741a2f 100644 />>>>>>>/--- a/ovn-nb.xml />>>>>>>/+++
> b/ovn-nb.xml />>>>>>>/@@ -4499,6 +4499,19 @@ or />>>>>>>/routes in
> <code>ovn-ic</code> daemon. />>>>>>>/</p> />>>>>>>/</column> />>>>>>>/+
> />>>>>>>/+ <column name="options" key="disable_arp_resolve"> />>>>>>>/+ <p>
> />>>>>>>/+ If set to <code>true</code>, disable get_arp for />>>>>>>/+
> known networks. />>>>>>>/+ </p> />>>>>>>/+ </column> />>>>>>>/+ <column
> name="options" key="disable_nd_resolve"> />>>>>>>/+ <p> />>>>>>>/+ If set
> to <code>true</code>, disable get_nd for />>>>>>>/+ known networks.
> />>>>>>>/+ </p> />>>>>>>/+ </column> />>>>>>>/</group>
> />>>>>>>//>>>>>>>/<group title="Attachment"> />>>>>>>/diff --git a/tests/
> ovn-northd.at b/tests/ovn-northd.at />>>>>>>/index 5c9cc5cca..7c8237acd
> 100644 />>>>>>>/--- a/tests/ovn-northd.at />>>>>>>/+++ b/tests/
> ovn-northd.at />>>>>>>/@@ -10111,6 +10111,87 @@ AT_CHECK([grep -e
> "ls_in_arp_rsp" S1flows | />>>>>>>/ovn_strip_lflows], [0], [dnl
> />>>>>>>/AT_CLEANUP />>>>>>>/]) />>>>>>>//>>>>>>>/+
> />>>>>>>/+OVN_FOR_EACH_NORTHD_NO_HV([ />>>>>>>/+AT_SETUP([check
> options:disable_arp_resolve and />>>>>>>/options:disable_nd_resolve for
> LRP]) />>>>>>>/+ovn_start NORTHD_TYPE />>>>>>>/+check ovn-nbctl lr-add S1
> />>>>>>>/+check ovn-nbctl --wait=sb lrp-add S1 S1-vm1 50:54:00:00:00:010
> />>>>>>>/192.168.0.10/24 fd00::2/64 />>>>>>>/+check ovn-nbctl --wait=sb
> lrp-set-gateway-chassis S1-vm1 chassis-1 />>>>>>>/+ />>>>>>>/+ovn-sbctl
> dump-flows S1 > S1flows />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+
> />>>>>>>/+ovn-sbctl dump-flows S1 > S1flows
> />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+ />>>>>>>/+AT_CHECK([grep -e
> "lr_in_arp_resolve" S1flows | ovn_strip_lflows], />>>>>>>/[0], [dnl
> />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=0 , match=(1),
> />>>>>>>/action=(drop;) />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=1
> , match=(reg9[[9]] />>>>>>>/== 0), action=(get_nd(outport, xxreg0); next;)
> />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=1 , match=(reg9[[9]]
> />>>>>>>/== 1), action=(get_arp(outport, reg0); next;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=500 , match=(ip4.mcast />>>>>>>/||
> ip6.mcast), action=(next;) />>>>>>>/+]) />>>>>>>/+ />>>>>>>/+ />>>>>>>/+#
> Set the disable_arp_resolve option and verify the flow />>>>>>>/+check
> ovn-nbctl --wait=sb set logical_router_port S1-vm1
> />>>>>>>/options:disable_arp_resolve=true />>>>>>>/+ />>>>>>>/+ovn-sbctl
> dump-flows S1 > S1flows />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+
> />>>>>>>/+AT_CHECK([grep -e "lr_in_arp_resolve" S1flows |
> ovn_strip_lflows], />>>>>>>/[0], [dnl />>>>>>>/+ table=??(lr_in_arp_resolve
> ), priority=0 , match=(1), />>>>>>>/action=(drop;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=1 , match=(reg9[[9]] />>>>>>>/== 0),
> action=(get_nd(outport, xxreg0); next;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=1 , match=(reg9[[9]] />>>>>>>/== 1),
> action=(get_arp(outport, reg0); next;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=50 , match=(inport ==
> />>>>>>>/"S1-vm1" && is_chassis_resident("cr-S1-vm1") && ((ip4.dst ==
> />>>>>>>/192.168.0.0/24))), action=(drop;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=500 , match=(ip4.mcast />>>>>>>/||
> ip6.mcast), action=(next;) />>>>>>>/+]) />>>>>>>/+ />>>>>>>/+check
> ovn-nbctl --wait=sb set logical_router_port S1-vm1
> />>>>>>>/options:disable_nd_resolve=true />>>>>>>/+ />>>>>>>/+ovn-sbctl
> dump-flows S1 > S1flows />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+
> />>>>>>>/+AT_CHECK([grep -e "lr_in_arp_resolve" S1flows |
> ovn_strip_lflows], />>>>>>>/[0], [dnl />>>>>>>/+ table=??(lr_in_arp_resolve
> ), priority=0 , match=(1), />>>>>>>/action=(drop;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=1 , match=(reg9[[9]] />>>>>>>/== 0),
> action=(get_nd(outport, xxreg0); next;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=1 , match=(reg9[[9]] />>>>>>>/== 1),
> action=(get_arp(outport, reg0); next;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=50 , match=(inport ==
> />>>>>>>/"S1-vm1" && is_chassis_resident("cr-S1-vm1") && ((ip4.dst ==
> />>>>>>>/192.168.0.0/24) || (ip6.dst == fd00::/64))), action=(drop;)
> />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=500 , match=(ip4.mcast
> />>>>>>>/|| ip6.mcast), action=(next;) />>>>>>>/+]) />>>>>>>/+ />>>>>>>/+#
> Remove lrp from chassis />>>>>>>/+check ovn-nbctl --wait=sb
> lrp-del-gateway-chassis S1-vm1 chassis-1 />>>>>>>/+ />>>>>>>/+ovn-sbctl
> dump-flows S1 > S1flows />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+
> />>>>>>>/+AT_CHECK([grep -e "lr_in_arp_resolve" S1flows |
> ovn_strip_lflows], />>>>>>>/[0], [dnl />>>>>>>/+ table=??(lr_in_arp_resolve
> ), priority=0 , match=(1), />>>>>>>/action=(drop;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=1 , match=(reg9[[9]] />>>>>>>/== 0),
> action=(get_nd(outport, xxreg0); next;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=1 , match=(reg9[[9]] />>>>>>>/== 1),
> action=(get_arp(outport, reg0); next;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=500 , match=(ip4.mcast />>>>>>>/||
> ip6.mcast), action=(next;) />>>>>>>/+]) />>>>>>>/+ />>>>>>>/+check
> ovn-nbctl --wait=sb set logical_router_port S1-vm1
> />>>>>>>/options:disable_arp_resolve=false />>>>>>>/+check ovn-nbctl
> --wait=sb lrp-set-gateway-chassis S1-vm1 chassis-1 />>>>>>>/+
> />>>>>>>/+ovn-sbctl dump-flows S1 > S1flows
> />>>>>>>/+AT_CAPTURE_FILE([S1flows]) />>>>>>>/+ />>>>>>>/+AT_CHECK([grep -e
> "lr_in_arp_resolve" S1flows | ovn_strip_lflows], />>>>>>>/[0], [dnl
> />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=0 , match=(1),
> />>>>>>>/action=(drop;) />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=1
> , match=(reg9[[9]] />>>>>>>/== 0), action=(get_nd(outport, xxreg0); next;)
> />>>>>>>/+ table=??(lr_in_arp_resolve ), priority=1 , match=(reg9[[9]]
> />>>>>>>/== 1), action=(get_arp(outport, reg0); next;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=50 , match=(inport ==
> />>>>>>>/"S1-vm1" && is_chassis_resident("cr-S1-vm1") && ((ip6.dst ==
> > fd00::/64))), />>>>>>>/action=(drop;) />>>>>>>/+
> table=??(lr_in_arp_resolve ), priority=500 , match=(ip4.mcast />>>>>>>/||
> ip6.mcast), action=(next;) />>>>>>>/+]) />>>>>>>/+ />>>>>>>/+
> />>>>>>>/+AT_CLEANUP />>>>>>>/+]) />>>>>>>/+ />>>>>>>/+
> />>>>>>>/OVN_FOR_EACH_NORTHD_NO_HV([ />>>>>>>/AT_SETUP([Address set
> incremental processing]) />>>>>>>/ovn_start />>>>>>>/-- />>>>>>>/2.43.0
> />>>>>>>//>>>>>>>//>>>>>>>/--
> />>>>>>>//>>>>>>>//>>>>>>>//>>>>>>>//>>>>>>>/_'Esta mensagem é direcionada
> apenas para os endereços constantes no />>>>>>>/cabeçalho inicial. Se você
> não está listado nos endereços constantes />>>>>>>/no />>>>>>>/cabeçalho,
> pedimos-lhe que desconsidere completamente o conteúdo />>>>>>>/dessa
> />>>>>>>/mensagem e cuja cópia, encaminhamento e/ou execução das ações
> />>>>>>>/citadas estão />>>>>>>/imediatamente anuladas e proibidas'._
> />>>>>>>//>>>>>>>//>>>>>>>/* **'Apesar do Magazine Luiza tomar
> />>>>>>>/todas as precauções razoáveis para assegurar que nenhum vírus
> esteja />>>>>>>/presente nesse e-mail, a empresa não poderá aceitar a
> />>>>>>>/responsabilidade por />>>>>>>/quaisquer perdas ou danos causados
> por esse e-mail ou por seus />>>>>>>/anexos'.*
> />>>>>>>//>>>>>>>//>>>>>>>//>>>>>>>/_______________________________________________
> />>>>>>>/dev mailing list />>>>>>>/dev at openvswitch.org
> > <https://mail.openvswitch.org/mailman/listinfo/ovs-dev> />>>>>>>/
> https://mail.openvswitch.org/mailman/listinfo/ovs-dev
> />>>>>>>//>>>>>>>//>>>>>//>>>>>/*‘Esta mensagem é direcionada apenas para
> os endereços constantes no />>>>>/cabeçalho inicial. Se você não está
> listado nos endereços constantes no />>>>>/cabeçalho, pedimos-lhe que
> desconsidere completamente o conteúdo dessa />>>>>/mensagem e cuja cópia,
> encaminhamento e/ou execução das ações citadas
> > estão />>>>>/imediatamente anuladas e proibidas’.*
> />>>>>//>>>>>/*‘Apesar do Magazine Luiza tomar todas as precauções
> razoáveis para />>>>>/assegurar que nenhum vírus esteja presente nesse
> e-mail, a empresa não />>>>>/poderá aceitar a responsabilidade por
> quaisquer perdas ou danos causados />>>>>/por esse e-mail ou por seus
> anexos’.* />>>>>//>>>>//>>>//>>>/*‘Esta mensagem é direcionada apenas para
> os endereços constantes no />>>/cabeçalho inicial. Se você não está listado
> nos endereços constantes no />>>/cabeçalho, pedimos-lhe que desconsidere
> completamente o conteúdo dessa />>>/mensagem e cuja cópia, encaminhamento
> e/ou execução das ações citadas
> > estão />>>/imediatamente anuladas e proibidas’.* />>>//>>>/*‘Apesar do
> Magazine Luiza tomar todas as precauções razoáveis para />>>/assegurar que
> nenhum vírus esteja presente nesse e-mail, a empresa não />>>/poderá
> aceitar a responsabilidade por quaisquer perdas ou danos causados />>>/por
> esse e-mail ou por seus anexos’.* />>>//>>//>//>/*‘Esta mensagem é
> direcionada apenas para os endereços constantes no />/cabeçalho inicial. Se
> você não está listado nos endereços constantes no />/cabeçalho, pedimos-lhe
> que desconsidere completamente o conteúdo dessa />/mensagem e cuja cópia,
> encaminhamento e/ou execução das ações citadas
> > estão />/imediatamente anuladas e proibidas’.* />//>/*‘Apesar do
> Magazine Luiza tomar todas as precauções razoáveis para />/assegurar que
> nenhum vírus esteja presente nesse e-mail, a empresa não />/poderá aceitar
> a responsabilidade por quaisquer perdas ou danos causados />/por esse
> e-mail ou por seus anexos’.* />//
>
>
>

-- 




_‘Esta mensagem é direcionada apenas para os endereços constantes no 
cabeçalho inicial. Se você não está listado nos endereços constantes no 
cabeçalho, pedimos-lhe que desconsidere completamente o conteúdo dessa 
mensagem e cuja cópia, encaminhamento e/ou execução das ações citadas estão 
imediatamente anuladas e proibidas’._


* **‘Apesar do Magazine Luiza tomar 
todas as precauções razoáveis para assegurar que nenhum vírus esteja 
presente nesse e-mail, a empresa não poderá aceitar a responsabilidade por 
quaisquer perdas ou danos causados por esse e-mail ou por seus anexos’.*



_______________________________________________
dev mailing list
[email protected]
https://mail.openvswitch.org/mailman/listinfo/ovs-dev

Reply via email to