Hi, i use ofws with a WL-500GP without problems (freifunk firmware).
Now i have installed owfs on a WRT54GL V1.1 (also freifunk firmware (http://download.berlin.freifunk.net/ipkg/_g+gl/) - owfs packages from http://home.mag.cx/openwrt/0.9/packages/) and when i start it with "run-owfs" all is o.k., i can walk through the bus in /tmp/1wire and the sensors. (fuse init (API version 7.2), fuse distribution version: 2.4.2). BUT i see it only when i start "run-owfs" manually. When i will start it automatically (ENABLESTARTUP="1" in /etc/default/owfs, owftpd, owhttpd, owserver (0644)) i will see the /tmp/1wire directory, but nothing in it. I see no error. When i start it with "run-owfs" manually again, all is o.k.. The path /usr/bin/run-owfs (0755) is o.k. and the path to /etc/init.d/S70owserver, S80owfs, S80owhttpd, S80owftpd (0755) [start force] is also without a problem. Is this a authorizations-problem (under openwrt?)? Do you know this problem? What can i do? I use owfs_2.6p6-6_mipsel.ipk owlib_2.6p6-6_mipsel.ipk from http://home.mag.cx/openwrt/0.9/packages/, the owfs_2.6p6-7_mipsel.ipk owlib_2.6p6-7_mipsel.ipk will have problems with my LCD, any other newer version did not work for me under openwrt, because i also never see sensor-contents in my /tmp/1wire directory (not the same error as above, here (newer versions) i see the directories, not the sensors; in my "premium problem" i see nothing in the 1wire directory). Thanks for your help! Holger ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
