Hi, the problem is (partially) solved: I have reinstalled the newest freifunk-firmware from http://download.berlin.freifunk.net/ipkg/_g+gl/ (openwrt-g-freifunk-1.6.22-de.bin). In the next step i am installing again owfs from http://home.mag.cx/openwrt/0.9/packages/ . When i use my first serial (RS232) DS9097-Adapter (passive), also the newest version (and previous) will now automatically run. I can?t say if this is an problem with the previous firmware or what else. But one little problem is always there: When i use my other serial (RS232) DS9097U (with DS2480B) Adapter, i can only use owfs_2.6p6-6_mipsel.ipk and owlib_2.6p6-6_mipsel.ipk, newer versions will not work for me because i never see sensor-contents. Is there a known problem with the DS9097"U"-Support?
Holger ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
