Same here, I thought our circuit somehow broke.
If I set the PIO high, the sensed goes down, but in the normal mode (PIO
low) I always get 1 for sensed.
Our version is 2.7p2 (and it worked when I installed this bit of hardware),
but I can't remember what we had before. I found the old packages 2.6p8 on
that computer, so that is probably what I used when I tried it out.
Michael
On Sun, Nov 9, 2008 at 11:16 PM, Jim Kusznir <[EMAIL PROTECTED]> wrote:
> Hi all:
>
> We finally rebuilt our very-aged server for our SmartApartment
> facility. As part of that upgrade, we upgraded from owfs2.6 to 2.7.
> Now, all of our DS2406-based devices are very broke.
>
> Symptoms include:
> reading sensed.A is ALWAYS 1 (although alarms seem to work correctly).
>
> This has been confirmed both through the fuse access and through owperl.
>
> Any thoughts/suggestions/ideas?
>
> (I'm going to go grab an older version of owfs and see if its still
> around).
>
> Thanks!
> --Jim
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Owfs-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
