I just checked the current version with a Ohm-meter (continuity). I can set
and unset PIO.A just fine. That's 2.7p8

I think the problem you refer to was fixed in March.

Paul Alfille

On Sun, Nov 9, 2008 at 6:14 PM, Michael Weber <[EMAIL PROTECTED]> wrote:

> Same here, I thought our circuit somehow broke.
>
> If I set the PIO high, the sensed goes down, but in the normal mode (PIO
> low) I always get 1 for sensed.
>
> Our version is 2.7p2 (and it worked when I installed this bit of hardware),
> but I can't remember what we had before. I found the old packages 2.6p8 on
> that computer, so that is probably what I used when I tried it out.
>
> Michael
>
>
> On Sun, Nov 9, 2008 at 11:16 PM, Jim Kusznir <[EMAIL PROTECTED]> wrote:
>
>> Hi all:
>>
>> We finally rebuilt our very-aged server for our SmartApartment
>> facility.  As part of that upgrade, we upgraded from owfs2.6 to 2.7.
>> Now, all of our DS2406-based devices are very broke.
>>
>> Symptoms include:
>> reading sensed.A is ALWAYS 1 (although alarms seem to work correctly).
>>
>> This has been confirmed both through the fuse access and through owperl.
>>
>> Any thoughts/suggestions/ideas?
>>
>> (I'm going to go grab an older version of owfs and see if its still
>> around).
>>
>> Thanks!
>> --Jim
>>
>> -------------------------------------------------------------------------
>> This SF.Net email is sponsored by the Moblin Your Move Developer's
>> challenge
>> Build the coolest Linux based applications with Moblin SDK & win great
>> prizes
>> Grand prize is a trip for two to an Open Source event anywhere in the
>> world
>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>> _______________________________________________
>> Owfs-developers mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>>
>>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Owfs-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers

Reply via email to