Hi Paul,
I will check the new version later this week.
But the problem was not with switching (PIO), but with sensing (sensed). Our
switches work fine, but the one unit where we sense the current of the lamp
(also using ds2406) always reports sensed.A=1 (and sensed.B for that matter,
but nothing connected on that side).
Michael
On Mon, Nov 10, 2008 at 2:36 AM, Paul Alfille <[EMAIL PROTECTED]>wrote:
> I just checked the current version with a Ohm-meter (continuity). I can set
> and unset PIO.A just fine. That's 2.7p8
>
> I think the problem you refer to was fixed in March.
>
> Paul Alfille
>
>
> On Sun, Nov 9, 2008 at 6:14 PM, Michael Weber <[EMAIL PROTECTED]> wrote:
>
>> Same here, I thought our circuit somehow broke.
>>
>> If I set the PIO high, the sensed goes down, but in the normal mode (PIO
>> low) I always get 1 for sensed.
>>
>> Our version is 2.7p2 (and it worked when I installed this bit of
>> hardware), but I can't remember what we had before. I found the old packages
>> 2.6p8 on that computer, so that is probably what I used when I tried it out.
>>
>> Michael
>>
>>
>> On Sun, Nov 9, 2008 at 11:16 PM, Jim Kusznir <[EMAIL PROTECTED]> wrote:
>>
>>> Hi all:
>>>
>>> We finally rebuilt our very-aged server for our SmartApartment
>>> facility. As part of that upgrade, we upgraded from owfs2.6 to 2.7.
>>> Now, all of our DS2406-based devices are very broke.
>>>
>>> Symptoms include:
>>> reading sensed.A is ALWAYS 1 (although alarms seem to work correctly).
>>>
>>> This has been confirmed both through the fuse access and through owperl.
>>>
>>> Any thoughts/suggestions/ideas?
>>>
>>> (I'm going to go grab an older version of owfs and see if its still
>>> around).
>>>
>>> Thanks!
>>> --Jim
>>>
>>> -------------------------------------------------------------------------
>>> This SF.Net email is sponsored by the Moblin Your Move Developer's
>>> challenge
>>> Build the coolest Linux based applications with Moblin SDK & win great
>>> prizes
>>> Grand prize is a trip for two to an Open Source event anywhere in the
>>> world
>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>>> _______________________________________________
>>> Owfs-developers mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>>>
>>>
>>
>> -------------------------------------------------------------------------
>> This SF.Net email is sponsored by the Moblin Your Move Developer's
>> challenge
>> Build the coolest Linux based applications with Moblin SDK & win great
>> prizes
>> Grand prize is a trip for two to an Open Source event anywhere in the
>> world
>> http://moblin-contest.org/redirect.php?banner_id=100&url=/
>> _______________________________________________
>> Owfs-developers mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>>
>>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's
> challenge
> Build the coolest Linux based applications with Moblin SDK & win great
> prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Owfs-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
>
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
