Hello, 2 years ago I started here gathering information to use ow/fs for use as datalogger in high power motor sports. Finally it's coming together and the story continues but I ran into some strange hardware trouble. I don't know or this is the right place to post a cry for help about hardware so if not please point me in the right direction...
I have owfs-2.7p8 on a intel micro-atx, kernel-2.6.27.4 without ow drivers inside. Got an one-wire 6-channel master hub from hobby-boards (ds9097) and some thermocouple adapters TAI8560 from aag (ds2670?) If I run ow(httpd,server,fs) with --fake=(chips above) I can see all sensors in my browser, but if I do a ls /mountpoint the terminal hangs. (not the system, just the terminal I am using at that time, opening a new ssh session is working fine) I tried a mountpoint on my (flash) harddrive and also a mountpoint on tmpfs, both times no go with ls. Second problem I have is that the sensors arent found, owhttpd show me the ds9097 but no sensors, which is not odd since the leds on the hub and thermocouples aren't lid. I connected 2 wires only (docs from hardware told me only both ow wires needed, no extra power supply) both in the middle of the connectors: RJ11 pin 2 to RJ45 pin 4 RJ11 pin 3 to RJ45 pin 5 Are the docs fooling me and did I do a wrong wiring or did I screw up my owfs build? ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
