I just hit a variation on the problem. My Python code just hangs.
owhttpd -p 3001 -d /dev/ttyS2 in a terminal comes back to me straight away suggesting that all is well, but http://localhost:3001 in a browser gives 'Unable to Connect' Rebooted - same problem Reboot again - all working fine! Is there anything more I can do to try to get to the bottom of this? Cheers Mick On Sat, 2011-01-22 at 17:31 -0500, Gregg Levine wrote: > On Sat, Jan 22, 2011 at 3:36 PM, Mick Sulley <m...@sulley.info> wrote: > > Hi Marcus, > > > > + I can't see anything in dmesg that suggests a problem. > > > > + It is a proper serial port, not USB. > > > > + Not using owserver. > > > > + I know this sounds like a stupid question, but how do I use owhttpd? > > >>From the example I found I have tried typing > > > > owhttpd -p 3001 -d /dev/ttyS2 > > > > in a terminal and it just comes straight back to me. Do I have to open > > up a browser? If so what address do need to call? > > > > Thanks > > Mick > > > > On Fri, 2011-01-21 at 10:10 +0100, Marcus Priesch wrote: > >> Hi Mick, > >> > >> + you could take a look at the dmesg output for any errors on your > >> serial port > >> > >> + try reloading the serial modules (ist it usb->serial?) > >> > >> + are you using owserver - and connecting remotely ? - then restarting > >> owserver could also help > >> > >> + other things would involve tyring owhttpd and see if it has the > >> same behaviour - and then use --debug on it and ... maybe post the > >> relevant parts here ... > >> > >> regards, > >> m. > >> > >> > >> Am Freitag, den 21.01.2011, 00:04 +0000 schrieb Mick Sulley: > >> > Hi, > >> > > >> > I have python code reading my 1-wire network using pyowfs and a DS9097 > >> > connected via a serial port. Sometimes when I start up it cannot see > >> > anything and I get the error > >> > > >> > ow_reconnect.c:TestConnection(52) Failed to reconnect DS9097 bus master! > >> > > >> > This is then a consistent problem, re-running the code just generates > >> > the same error. However if I reboot, changing nothing at all, it works > >> > fine again! > >> > > >> > Any ideas what can cause this and how to fix it? > >> > > >> > Running Ubuntu 10.10 64 bit and owfs version 2.8p4 > >> > > >> > Thanks > >> > > >> > Mick > > Hello! > Mick the fact that it comes back to you confirms it is working. > Open a browser, and type into its locator window http://localhost:3001 > > : Inside there you should see stuff working. > > ----- > Gregg C Levine gregg.drw...@gmail.com > "This signature fought the Time Wars, time and again." ------------------------------------------------------------------------------ Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! Finally, a world-class log management solution at an even better price-free! Download using promo code Free_Logger_4_Dev2Dev. Offer expires February 28th, so secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsight-sfd2d _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
