kkkk i was asking "?" not affirming. there´s a echo command for serial-onewire converter?
2011/1/31 Mick Sulley <m...@sulley.info>: > Hi Roberto, > > My 1-wire is currently working OK so I thought I would try out your > suggestion to see what I get. > > I open up a Putty session, set it to serial connection, serial > line /dev/ttyS2, speed 9600 > > There is no cursor in the window, if I type 'hello' and hit return the > cursor goes back to the start of the line. I expected it to echo back > on the next line, have I done something wrong here? > > Thanks > Mick > > > On Mon, 2011-01-31 at 12:47 -0200, Roberto Spadim wrote: >> there's a easy ping test for serial adapters? >> for example, if i plug my serial-onewire converter, could i open putty >> or another serial program and send "hello" and it will give me >> "hello"? >> it's just for easy test (without owfs) >> >> 2011/1/31 Mick Sulley <m...@sulley.info>: >> > OK it just happened again. Started my python program and it failed >> > with >> > DEFAULT: ow_reconnect.c:TestConnection(52) Failed to reconnect DS9097 >> > bus master! >> > >> > In a terminal I ran >> > owhttpd -p 3001 -d /dev/ttyS2 --debug >> > >> > and this gave me >> > >> > CONNECT: ow_avahi_link.c:OW_Load_avahi_library(72) No Avahi support. >> > Library libavahi-client couldn't be loaded >> > CONNECT: ow_dnssd.c:OW_Load_dnssd_library(136) Zeroconf/Bonjour is >> > disabled since dnssd library isn't found >> > CALL: ow_parsename.c:FS_ParsedName_anywhere(90) path=[] >> > DEBUG: owlib.c:SetupTemperatureLimits(79) Globals temp limits 0C 100C >> > (for simulated adapters) >> > DEBUG: ow_ds9097U.c:DS2480_initialize_repeatedly(259) Attempt #0 to >> > initialize the DS9097U >> > DEBUG: ow_ds9097U.c:DS2480_big_reset_serial(337) Send the initial >> > reset to the bus master. >> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 >> > not 00) >> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(488) Failed first attempt >> > at resetting baud rate of bus master /dev/ttyS2 >> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 >> > not 00) >> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(493) Failed second attempt >> > at resetting baud rate of bus master /dev/ttyS2 >> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 >> > not 00) >> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(488) Failed first attempt >> > at resetting baud rate of bus master /dev/ttyS2 >> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 >> > not 00) >> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(493) Failed second attempt >> > at resetting baud rate of bus master /dev/ttyS2 >> > DEBUG: ow_ds9097U.c:DS2480_configuration_write(451) wrong response (CD >> > not 44) >> > DEBUG: ow_ds9097U.c:DS2480_big_reset_serial(337) Send the initial >> > reset to the bus master. >> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 >> > not 00) >> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(488) Failed first attempt >> > at resetting baud rate of bus master /dev/ttyS2 >> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 >> > not 00) >> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(493) Failed second attempt >> > at resetting baud rate of bus master /dev/ttyS2 >> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 >> > not 00) >> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(488) Failed first attempt >> > at resetting baud rate of bus master /dev/ttyS2 >> > DEBUG: ow_ds9097U.c:DS2480_configuration_read(467) wrong response (70 >> > not 00) >> > DEBUG: ow_ds9097U.c:DS2480_set_baud_control(493) Failed second attempt >> > at resetting baud rate of bus master /dev/ttyS2 >> > DEBUG: ow_ds9097U.c:DS2480_configuration_write(451) wrong response (CD >> > not 44) >> > >> > >> > I opened up a browser on http://localhost:3001/ and it says unable to >> > connect. >> > >> > The serial port looks OK >> > mick@mick-desktop:~$ dmesg | grep tty >> > [ 0.000000] console [tty0] enabled >> > [ 0.489257] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> > [ 0.489554] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >> > [ 14.681524] 0000:03:07.0: ttyS1 at I/O 0xdf00 (irq = 17) is a 16550A >> > [ 14.681616] 0000:03:07.0: ttyS2 at I/O 0xde00 (irq = 17) is a 16550A >> > mick@mick-desktop:~$ >> > >> > >> > I then rebooted and it all works fine! >> > >> > Any idea what could cause this problem? >> > >> > Thanks >> > >> > Mick >> > >> > >> > >> > ------------------------------------------------------------------------------ >> > Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! >> > Finally, a world-class log management solution at an even better >> > price-free! >> > Download using promo code Free_Logger_4_Dev2Dev. Offer expires >> > February 28th, so secure your free ArcSight Logger TODAY! >> > http://p.sf.net/sfu/arcsight-sfd2d >> > _______________________________________________ >> > Owfs-developers mailing list >> > Owfs-developers@lists.sourceforge.net >> > https://lists.sourceforge.net/lists/listinfo/owfs-developers >> > >> > >> >> >> > > > > ------------------------------------------------------------------------------ > Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! > Finally, a world-class log management solution at an even better price-free! > Download using promo code Free_Logger_4_Dev2Dev. Offer expires > February 28th, so secure your free ArcSight Logger TODAY! > http://p.sf.net/sfu/arcsight-sfd2d > _______________________________________________ > Owfs-developers mailing list > Owfs-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/owfs-developers > > -- Roberto Spadim Spadim Technology / SPAEmpresarial ------------------------------------------------------------------------------ Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! Finally, a world-class log management solution at an even better price-free! Download using promo code Free_Logger_4_Dev2Dev. Offer expires February 28th, so secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsight-sfd2d _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
