Hello Jason,
I have used the current measurement input of a DS2438 in conjunction with a
current shunt to measure battery charging current in the negative lead, for
battery voltage measurement a potential divider is needed on the measurement
input. The circuit can be powered from the 1-wire bus or from a separate 5
volt regulator, the current drain is very low, less than 1mA
It is NOT possible to use a current transformer (donut) in a DC circuit, you
may be able to get a hall effect monitor device but the circuit will then
get complicated.
However as suggested removing some fuses would be more instructive.
hth David.
------------------------------------------------------------------------------
EditLive Enterprise is the world's most technically advanced content
authoring tool. Experience the power of Track Changes, Inline Image
Editing and ensure content is compliant with Accessibility Checking.
http://p.sf.net/sfu/ephox-dev2dev
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers