On Sun, 6 Aug 2017 22:10:11 +0200
Jan Kandziora <j...@gmx.de> wrote:
> Am 06.08.2017 um 18:52 schrieb Michael Hughes:
> >
> > I am using the ow C API to read all of my Dallas 1-Wire devices.
> > I do a OW_init("/dev/cuao0"). I then go in to a loop and use
> > OW_get to read each device. I use the following line to read the
> > voltages:
> >
> > OW_get( "/uncached/1F.49D100000000/main/20.EDCD00000000/volt.all",
> > &buf, &s );
> >
> Please give me some time to prepare such a setup of a DS2450 behind a
> DS2409 myself.
>
> Could you test if you had the same problem when the DS2450 is directly
> connected to the host adaptor?
>
> Kind regards
>
> Jan
>
Jan,
Sorry it has taken me so long to get back to you on this, I had a
lightening hit and it took out my RS-232 to 1-Wire interface and didn't
have a spare.
With the DS2450 connected straight to the interface, it still comes up
with strange voltages after unplugging the DS2450 from the 1-Wire
network and plugging it back in.
Here are the values before:
owread /uncached/20.078914000000/volt.ALL;echo
4.61507, 4.63577, 4.65366, 2.37816
and after:
owread /uncached/20.078914000000/volt.ALL;echo
0, 0, 0, 4.78007
--
Michael D Hughes
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
