Use a smd adapter board like? to repair? You need very tip to solder and thin solder 0,5 mm, almost needle like.
http://www.hobbytronics.co.uk/prototyping/smd-adapter-boards Nico Steinar Midtskogen schreef:
Hi all, Many years ago I built a snow depth sensor based on the LP-THS temperature/humidity board, but it has now had a failure. I do have some spare parts, including the DS2409 which apparently had failed on the board, but I've had to give up repairing. First, a pad came off when I desoldered the faulty DS2409. Then I tried to solder wires on the DS2409 so I could still connect it to the board, but at first attempt one leg came off. On second attempt using a another DS2409 at least one wire came off whenever I tried to solder it on the LP-THS board. Well, my soldering skills are not up to the task... Since the maker shut down a few years ago, I'm reaching out here in case somebody has one of two of these boards laying around and would be interested in selling, or if anyone knows where to get these boards, please let me know. A search on eBay gave nothing. -- Steinar _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
-- 0623391101 _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
