Hi Mon, I also ran into this with PF 4 on ESX 5.1, In my case I tried switching the network cards to E1000 instead of the VM flexible and then all the nics showed as enabled. -Will
> Message: 3 > Date: Thu, 16 May 2013 05:16:50 +0800 (SGT) > From: Raymond Samonte <[email protected]> > Subject: [PacketFence-users] eth1 won?t enable on Packetfence ZEN > 4.0.0 ESX while running Step2 on setup wizard > To: "[email protected]" > <[email protected]> > Message-ID: > <[email protected]> > Content-Type: text/plain; charset="utf-8" > > Hi to all, > I?m not yet done testing Packetfence ZEN 3.6.1 but here > comes 4.0.0?. > Here?s what I?ve done: > 1.?????? Install Packetfence ZEN 4.0.0 ovf file on VMWare > esxi 5.1 and power on VM. > 2.?????? Login using root as user and p@ck3tf3nc3 as > password. > 3.?????? Manually configure IP address of eth1 (10.0.10.1 > /24) and restart network (service network restart). > 4.?????? Open browser and access web gui. > (https://10.0.10.1:1443/configurator). > 5.?????? Run wizard. Step 1 ? VLAN mode. > 6.?????? Step 2 ? Assign eth1 as management. > ????a.?????? Create VLAN for Registration (eth1.2 ? > 192.168.2.10/24) > ????b.????? Create VLAN for Isolation (eth1.3 ? > 192.168.3.10/24) > ????c.?????? Create VLAN for Guest (eth1.5 ? 192.168.5.10/24) > 7.?????? Then the problem occurs. > ????a.?????? Eth1.2, eth1.3, eth1.5 are enable when created. > ????b.????? Eth1 (physical) assigned as management cannot be > enabled and it stay at ?off? position. > 8.?????? I continue the setup wizard until all steps is > finished. > 9.?????? Then I access the Packetfence Web Gui (https://10.0.10.1:1443/admin) > and > configure the switches, guest access and other settings. > 10.?? Finally, I restart the Packetfence VM (shutdown > ?r now) and when it boots up, I cannot access the web gui anymore (because > eth1 > is not enabled on setup wizard even though it is enabled when the packetfence > boots up). > Eht1 ===> > Management = Off Position (disabled) cannot be enabled. > Eth1.2 == = >> Registration = On Position (enabled) > Eht1.3 === >> Isolation = On Position (enabled) > Eth1.5 === >> Guest = On Position (enabled) > ? > Is there someone encounter same problem as mine using the > new Packetfence ZEN 4.0.0? > Hope someone could help me on this. > ? > Best regards, > Mon ? ------------------------------------------------------------------------------ AlienVault Unified Security Management (USM) platform delivers complete security visibility with the essential security capabilities. Easily and efficiently configure, manage, and operate all of your security controls from a single console and one unified framework. Download a free trial. http://p.sf.net/sfu/alienvault_d2d _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
