Hi, The reason why VMNET are not working is because *I think* the VMWare tools are not installed on the ZEN VM.
On 2013-05-16 9:05 AM, Rossing, Will wrote: > Hi Mon, > I also ran into this with PF 4 on ESX 5.1, In my case I tried > switching the network cards to E1000 instead of the VM flexible and > then all the nics showed as enabled. > -Will > > >> Message: 3 >> Date: Thu, 16 May 2013 05:16:50 +0800 (SGT) >> From: Raymond Samonte <[email protected]> >> Subject: [PacketFence-users] eth1 won?t enable on Packetfence ZEN >> 4.0.0 ESX while running Step2 on setup wizard >> To: "[email protected]" >> <[email protected]> >> Message-ID: >> <[email protected]> >> Content-Type: text/plain; charset="utf-8" >> >> Hi to all, >> I?m not yet done testing Packetfence ZEN 3.6.1 but here >> comes 4.0.0?. >> Here?s what I?ve done: >> 1.?????? Install Packetfence ZEN 4.0.0 ovf file on VMWare >> esxi 5.1 and power on VM. >> 2.?????? Login using root as user and p@ck3tf3nc3 as >> password. >> 3.?????? Manually configure IP address of eth1 (10.0.10.1 >> /24) and restart network (service network restart). >> 4.?????? Open browser and access web gui. >> (https://10.0.10.1:1443/configurator). >> 5.?????? Run wizard. Step 1 ? VLAN mode. >> 6.?????? Step 2 ? Assign eth1 as management. >> ????a.?????? Create VLAN for Registration (eth1.2 ? >> 192.168.2.10/24) >> ????b.????? Create VLAN for Isolation (eth1.3 ? >> 192.168.3.10/24) >> ????c.?????? Create VLAN for Guest (eth1.5 ? 192.168.5.10/24) >> 7.?????? Then the problem occurs. >> ????a.?????? Eth1.2, eth1.3, eth1.5 are enable when created. >> ????b.????? Eth1 (physical) assigned as management cannot be >> enabled and it stay at ?off? position. >> 8.?????? I continue the setup wizard until all steps is >> finished. >> 9.?????? Then I access the Packetfence Web Gui >> (https://10.0.10.1:1443/admin) and >> configure the switches, guest access and other settings. >> 10.?? Finally, I restart the Packetfence VM (shutdown >> ?r now) and when it boots up, I cannot access the web gui anymore (because >> eth1 >> is not enabled on setup wizard even though it is enabled when the packetfence >> boots up). >> Eht1 ===> >> Management = Off Position (disabled) cannot be enabled. >> Eth1.2 == = >>> Registration = On Position (enabled) >> Eht1.3 === >>> Isolation = On Position (enabled) >> Eth1.5 === >>> Guest = On Position (enabled) >> ? >> Is there someone encounter same problem as mine using the >> new Packetfence ZEN 4.0.0? >> Hope someone could help me on this. >> ? >> Best regards, >> Mon ? > ------------------------------------------------------------------------------ > AlienVault Unified Security Management (USM) platform delivers complete > security visibility with the essential security capabilities. Easily and > efficiently configure, manage, and operate all of your security controls > from a single console and one unified framework. Download a free trial. > http://p.sf.net/sfu/alienvault_d2d > _______________________________________________ > PacketFence-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/packetfence-users > -- Francois Gaudreault Architecte de Solution Cloud | Cloud Solutions Architect [email protected] 514-629-6775 - - - CloudOps 420 rue Guy Montréal QC H3J 1S6 www.cloudops.com @CloudOps_ ------------------------------------------------------------------------------ AlienVault Unified Security Management (USM) platform delivers complete security visibility with the essential security capabilities. Easily and efficiently configure, manage, and operate all of your security controls from a single console and one unified framework. Download a free trial. http://p.sf.net/sfu/alienvault_d2d _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
