Hi Mark, Did you ever get this fixed? I have the exact same problem using a Centos 6.4 VM. I just started installing 4.0.1 yesterday. Ifconfig -a looks fine:
eth0 Link encap:Ethernet HWaddr 00:50:56:AF:00:96
inet addr: xxx.xxx.xxx.xxx Bcast:bbb.bbb.bbb.bbb Mask:255.255.254.0
inet6 addr: fe80::250:56ff:feaf:96/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:100724 errors:0 dropped:0 overruns:0 frame:0
TX packets:13732 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16563778 (15.7 MiB) TX bytes:5447213 (5.1 MiB)
eth0.520 Link encap:Ethernet HWaddr 00:50:56:AF:00:96
inet addr:192.168.52.1 Bcast:192.168.52.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:feaf:96/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:720 (720.0 b)
eth0.530 Link encap:Ethernet HWaddr 00:50:56:AF:00:96
inet addr:192.168.53.1 Bcast:192.168.53.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:feaf:96/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:720 (720.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:96 errors:0 dropped:0 overruns:0 frame:0
TX packets:96 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5616 (5.4 KiB) TX bytes:5616 (5.4 KiB)
Thanks!
Steve Wittstruck
Colorado School of Mines
On Jun 17, 2013, at 3:00 PM, Mark Shetka <[email protected]> wrote:
> Whoops, I spoke to soon. The configurator saw my interfaces one time only
> after I told Aptitude to reinstall the package. Upon reboot it is broke
> again (will not see any interfaces when I run congfigurator).
>
>
> On Mon, Jun 17, 2013 at 3:21 PM, Mark Shetka <[email protected]> wrote:
> I updated from the 4.0.1 June 14th version to June 17th and this issue is now
> fixed.
>
>
> On Sat, Jun 15, 2013 at 2:04 PM, Mark Shetka <[email protected]> wrote:
> Hi,
>
> This is my first time setting up PF. Install is on Debian Wheezy in a VM
> environment. I have loaded PF 4.0.1, but when I go to the web configurator
> tool it does not see any interfaces. Right now I have three vlans plumbed to
> the PF server (eth0,eth1,eth2). It is my understanding that configurator
> attempts to parse the output of "/sbin/ifconfig -a", which looks normal to
> me. I'm not sure what I am missing here. Any ideas?
>
> Thanks!
>
> Mark
>
> --
> Mark Shetka
> Information Technology Systems & Services
> University of Minnesota - Duluth
> (218) 726-7682
>
>
>
> --
> Mark Shetka
> Information Technology Systems & Services
> University of Minnesota - Duluth
> (218) 726-7682
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev_______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
smime.p7s
Description: S/MIME cryptographic signature
------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
