I suggets running FreeRADIUS in debug mode (-X) or using raddebug to see what
is the value of the NAS-Ip-Address attribute.
If it differs from the source IP of the request itself (the controller's IP)
you may have to put an entry for both the controller and the AP in
switches.conf.
PacketFence sends the deauthentication request to the IP in the NAS-IP-Address.
If the IP is that of the AP rather than the controller the deauth will most
likely fail unless you have an entry for it in switches.conf with
"controller_ip" set to the IP where the request should really be sent.
Regards,
--
Louis Munro
[email protected] :: www.inverse.ca
+1.514.447.4918 *125 :: +1 (866) 353-6153
Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence
(www.packetfence.org)
On 2013-07-26, at 8:55 , Christopher David Herbold <[email protected]> wrote:
> The odd part is that it seems to ignore the controller_ip value as the logs
> indicate that it can not communicate with the AP (IP of the AP is in the logs
> not the controller). I have tried both SSH and SNMP to no avail. I am running
> the latest 6.x firmware with a MSM 760 controller (AP's are primarily
> MSM460's)
>
> Thanks for the heads up I will double sheck a few things and try a manual SSH
> death.
>
>
>
> On Jul 25, 2013, at 10:05 AM, Louis Munro <[email protected]> wrote:
>
>> To be more precise, there were issues with some firmware where neither SSH
>> nor SNMP deauth were working, especially when the controller was managing
>> thousands of devices.
>> This may, or may not be your problem.
>> I am in the middle of implementing support for the SOAP API which ought to
>> fix those problems.
>>
>> Try to see if manual ssh deauth works first. If it doesn't, you know that
>> method is worthless for you and you should try SNMP.
>>
>> Then check to see if you get errors in the logs about an unknown RADIUS
>> client.
>>
>> Let me know what you find.
>> Regards,
>> --
>> Louis Munro
>> [email protected] :: www.inverse.ca
>> +1.514.447.4918 *125 :: +1 (866) 353-6153
>> Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence
>> (www.packetfence.org)
>>
>> On 2013-07-25, at 10:56 , Derek Wuelfrath <[email protected]> wrote:
>>
>>> We are in the process of reworking it :)
>>> We had some issues with it and will keep the list posted with upcoming
>>> updates.
>>>
>>> Derek
>>>
>>> --
>>> Derek Wuelfrath
>>> [email protected] :: +1.514.447.4918 (x110) :: www.inverse.ca
>>> Inverse inc. :: Leaders behind SOGo (www.sogo.nu) and PacketFence
>>> (www.packetfence.org)
>>>
>>> On 2013-07-25, at 9:48 AM, Francois Gaudreault <[email protected]>
>>> wrote:
>>>
>>>> The module is fine. The majority of the time, the issues are caused by
>>>> a buggy firmware. What version are you using? Is it latest?
>>>>
>>>> On 2013-07-24 3:58 PM, Christopher David Herbold wrote:
>>>>> Does anyone have experience in getting HP MSM controllers to properly
>>>>> Deauth client machines? I have dabbled into maybe editing the
>>>>> Controllers_MSM710.pm file to try to get it to process the deauth
>>>>> properly. I have also set the controller_ip setting in the
>>>>> switch.conf file for the device(AP) in question.
>>>>>
>>>>>
>>>>> Thanks for any help anyone can provide.
>>>>> -Chris Herbold
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> See everything from the browser to the database with AppDynamics
>>>>> Get end-to-end visibility with application monitoring from AppDynamics
>>>>> Isolate bottlenecks and diagnose root cause in seconds.
>>>>> Start your free trial of AppDynamics Pro today!
>>>>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> PacketFence-users mailing list
>>>>> [email protected]
>>>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>>
>>>>
>>>> --
>>>> Francois Gaudreault
>>>> Architecte de Solution Cloud | Cloud Solutions Architect
>>>> [email protected]
>>>> 514-629-6775
>>>> - - -
>>>> CloudOps
>>>> 420 rue Guy
>>>> Montréal QC H3J 1S6
>>>> www.cloudops.com
>>>> @CloudOps_
>>>>
>>>>
>>>> ------------------------------------------------------------------------------
>>>> See everything from the browser to the database with AppDynamics
>>>> Get end-to-end visibility with application monitoring from AppDynamics
>>>> Isolate bottlenecks and diagnose root cause in seconds.
>>>> Start your free trial of AppDynamics Pro today!
>>>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>>>> _______________________________________________
>>>> PacketFence-users mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>>
>>>
>>> ------------------------------------------------------------------------------
>>> See everything from the browser to the database with AppDynamics
>>> Get end-to-end visibility with application monitoring from AppDynamics
>>> Isolate bottlenecks and diagnose root cause in seconds.
>>> Start your free trial of AppDynamics Pro today!
>>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
>>> _______________________________________________
>>> PacketFence-users mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>>
>> ------------------------------------------------------------------------------
>> See everything from the browser to the database with AppDynamics
>> Get end-to-end visibility with application monitoring from AppDynamics
>> Isolate bottlenecks and diagnose root cause in seconds.
>> Start your free trial of AppDynamics Pro today!
>> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk_______________________________________________
>> PacketFence-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
> ------------------------------------------------------------------------------
> See everything from the browser to the database with AppDynamics
> Get end-to-end visibility with application monitoring from AppDynamics
> Isolate bottlenecks and diagnose root cause in seconds.
> Start your free trial of AppDynamics Pro today!
> http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk_______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
See everything from the browser to the database with AppDynamics
Get end-to-end visibility with application monitoring from AppDynamics
Isolate bottlenecks and diagnose root cause in seconds.
Start your free trial of AppDynamics Pro today!
http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
