sampath jayashantha wrote: > Hi fellow people, > > After getting tired with old cisco 2950 old switch i found a new switch > 2960 as my new packet fence switch. I have completed the switch > configuration according to the support document. But the problem is when > i plug in a device to switch port 4 nothing happen. I cant see any event > on switch and packet fence side logs.
Any particular reason you're using the port-security method? The 2960 is fully capable of full 802.1x with RADIUS de-auth. For your current configuration, you need to make sure that traps from the switch are making it to the server. Is iptables on the packetfence server open for incoming 162/udp connections? Did you restart radiusd after adding the new switch config? > Am i missing anything ? -- --------------------------- Jason 'XenoPhage' Frisvold [email protected] --------------------------- "Any sufficiently advanced magic is indistinguishable from technology.\" - Niven's Inverse of Clarke's Third Law ------------------------------------------------------------------------------ Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce. With Perforce, you get hassle-free workflows. Merge that actually works. Faster operations. Version large binaries. Built-in WAN optimization and the freedom to use Git, Perforce or both. Make the move to Perforce. http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
