Hi sallee,
This one ? Help with Cisco 2960 and
1242<http://sourceforge.net/p/packetfence/mailman/message/29744760>
Regards,
Sampath
On Mon, Mar 3, 2014 at 9:46 PM, Sallee, Jake <[email protected]> wrote:
> Search for my name and 2960 in the archives, I posted the necessary config
> bits to make PF work with MAB on just about any cisco switch.
>
> Jake Sallee
> Godfather of Bandwidth
> System Engineer
> University of Mary Hardin-Baylor
>
> 900 College St.
> Belton, Texas
> 76513
>
> Fone: 254-295-4658
> Phax: 254-295-4221
> ________________________________
> From: sampath jayashantha [[email protected]]
> Sent: Monday, March 03, 2014 9:24 AM
> To: [email protected]
> Subject: Re: [PacketFence-users] Adding switch to packet fence,
>
> Dear Jason,
>
> I just followed the packet fence device configuration guide to
> configure the switch. I can see there are lot of methods like, telnet, ssh,
> snmp, radius etc on packet fence switch add GUI. But i'm little bit confuse
> with those options Which are how to relate to each other. :(
> To make packet fence up and running with a vary basic configuration
> could you please tell me which configuration i need to do in switch side
> and the packet fence side.
> Same time what is the different between port-security method and full
> 802.1x with RADIUS de-auth. Little bit confused with those terminologies.
> And what will be the role for SNMP traps ? What is actually does ?
>
> Note:
> No need to explain in a very detail manner. Just briefing will be enough
> to find the right path for me.
>
> Regards,
> Sampath
>
>
> On Mon, Mar 3, 2014 at 8:40 PM, Jason Frisvold <[email protected]
> <mailto:[email protected]>> wrote:
> sampath jayashantha wrote:
> > Hi fellow people,
> >
> > After getting tired with old cisco 2950 old switch i found a new switch
> > 2960 as my new packet fence switch. I have completed the switch
> > configuration according to the support document. But the problem is when
> > i plug in a device to switch port 4 nothing happen. I cant see any event
> > on switch and packet fence side logs.
>
> Any particular reason you're using the port-security method? The 2960
> is fully capable of full 802.1x with RADIUS de-auth.
>
> For your current configuration, you need to make sure that traps from
> the switch are making it to the server. Is iptables on the packetfence
> server open for incoming 162/udp connections? Did you restart radiusd
> after adding the new switch config?
>
> > Am i missing anything ?
>
> --
> ---------------------------
> Jason 'XenoPhage' Frisvold
> [email protected]<mailto:[email protected]>
> ---------------------------
>
> "Any sufficiently advanced magic is indistinguishable from technology.\"
> - Niven's Inverse of Clarke's Third Law
>
>
> ------------------------------------------------------------------------------
> Subversion Kills Productivity. Get off Subversion & Make the Move to
> Perforce.
> With Perforce, you get hassle-free workflows. Merge that actually works.
> Faster operations. Version large binaries. Built-in WAN optimization and
> the
> freedom to use Git, Perforce or both. Make the move to Perforce.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk
> _______________________________________________
> PacketFence-users mailing list
> [email protected]<mailto:
> [email protected]>
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
>
>
> --
>
> ..........................................................................................
>
> There is always some one who know more Than us out there.
>
> Wê Lïvê †ð §hårê : Wê Lðvê †ð §hårê
>
>
>
> SAM
>
>
> ------------------------------------------------------------------------------
> Subversion Kills Productivity. Get off Subversion & Make the Move to
> Perforce.
> With Perforce, you get hassle-free workflows. Merge that actually works.
> Faster operations. Version large binaries. Built-in WAN optimization and
> the
> freedom to use Git, Perforce or both. Make the move to Perforce.
>
> http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk
> _______________________________________________
> PacketFence-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/packetfence-users
>
--
..........................................................................................
There is always some one who know more Than us out there.
Wê Lïvê †ð §hårê : Wê Lðvê †ð §hårê
SAM
------------------------------------------------------------------------------
Subversion Kills Productivity. Get off Subversion & Make the Move to Perforce.
With Perforce, you get hassle-free workflows. Merge that actually works.
Faster operations. Version large binaries. Built-in WAN optimization and the
freedom to use Git, Perforce or both. Make the move to Perforce.
http://pubads.g.doubleclick.net/gampad/clk?id=122218951&iu=/4140/ostg.clktrk
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
