Hi Fabrice,
Sorry for taking so long to get back to you, I appreciate your help. We were
not using Active Directory but I have setup a server that is to use for this
project. I followed the instructions and successfully added the packetfence
server to AD. I also added AD as a source and it tested and saved
successfully. I added a rule and that adds all users to the default role and
an expiration date of 2020. However when I try to connect via wireless it says
unable to connect to network. Let me know if there is any config files I can
post or information needed that will help.
Also, do you know when 4.4 is scheduled to be released?
thanksBrian
Date: Sun, 10 Aug 2014 13:13:06 -0400
From: [email protected]
To: [email protected]
Subject: Re: [PacketFence-users] Adding Aerohive Access Points
Hi Brian,
currently it´s not possible to use local user account for 802.1x
(wait for pf 4.4 it will be available or try devel version and apply
this patch
https://github.com/inverse-inc/packetfence/pull/212.diff).
If you have an active directory you can enable ntlm_auth in
freeradius (Follow the documentation).
Regards
Fabrice
Le 2014-08-09 13:07, Brian Motts a
écrit :
I am new too both AeroHive/PacketFence and
attempting to get it setup. We have the ZEN deployment and a
cloud managed AeroHive deployment. We are attempting to use
802.1x authentication. I have followed the network setup guide
to get the AeroHive portion setup. What configuration do I need
to do on the PacketFence side to get this working? I attempted
to add a switch but am not sure what settings the wireless
access points need. When trying to login we get the login
prompt for username and password then it gives a not verified
certificate and requires an accept. Once clicked it says
incorrect Username and password. The user is setup as a local
user on the PacketFence server and the username and password are
definitely correct. The radius log shows the following error:
Sat Aug 9 12:55:49 2014 : Auth: Login incorrect:
[admin] (from client 192.168.2.80 port 0 cli B8-E8-56-8C-8B-6A)
My settings are as follows:
DEFINITION TAB
Description: Test
Type: AeroHIVE AP
Mode: Production
Deauthentication Method: RADIUS
Dynamic Uplinks: Checked
Controller IP Address: (Blank because we are using the
cloud controller)
Controller Port: Blank
Portal URL: Blank
ROLES TAB
default: 3 (production VLAN)
RADIUS TAB
Secret Passphrase: (Passphrase that AeroHIVE is using
is entered here)
Do i need SNMP CLI or Web Services? Currently I have
nothing setup in any of them. Any help would be
appreciated. I have looked through both the admin guide,
zen guide, network device guide and searched the mailing
list archives and haven't been able to find an answer. I
am new to both of these technologies so I may be missing
something completely obvious.
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Slashdot TV.
Video for Nerds. Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
