Hi Steven, without more information i can't help you.
Can you give me information of what you are doing in the configurator (step by step)
Also: - the network you want to use for mgmt and for inline ? - the pf.conf and networks.conf files. - the result of ip addr and ip route - the result of cat /proc/sys/net/ipv4/ip_forward Also did you disabled selinux/apparmor ?The last thing, you talk about changing the default gateway, the default one is suppose to be the system defaultone so if you change it you probably break the default route.
Regards Fabrice Le 2015-03-25 16:07, Steven Jones a écrit :
Hi, it is only simple to do if you know the system, so far i am guessing on multiple pages as there is no explanation, no process to follow. Sadly there isnt anything of use on youtube or via google so far either. Reading through copious posts on different sites its pretty clear others as well as myself are finding the documentation is severely lacking. In fact about all I can say is its close to the poorest I have seen. regards Steven ________________________________ From: Durand fabrice <[email protected]> Sent: Tuesday, 24 March 2015 11:00 a.m. To: [email protected] Subject: Re: [PacketFence-users] inline manual / cli setip guide by example. Hi Steven, Inline setup is really simple to do. In packetfence define a management interface and an inline interface (Type:inline layer 2, DNS:8.8.8.8). Also don't forget to enable ip_forward. Now connect a laptop in the inline network and if you are unreg then you will hit the portal. If your device is reg then packetfence will act as a gateway and your traffic will use mgmt ip address to reach internet. http://www.packetfence.org/downloads/PacketFence/doc/PacketFence_Administration_Guide-4.7.0.pdf Regards Fabrice Le 2015-03-23 17:21, Steven Jones a écrit : Hi, Does anyone have a nice simple config howto via command line to set up packet fence in inline mode? I have eth0 as the default network and eth1 as the wifi network I want to control/limit. The web ui is simply un-usuable without more documentation explaining the options so I need some manual configuration guide(s). thanks regards Steven J ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ PacketFence-users mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/packetfence-users ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
