Hi,
Yes Selinux was disabled. Packetfence and especially the web ui would not work
on RHEl6.6 so I have installed it on Debian 7.0.8 where it works fine. The
web ui on Debian works fine and the default default gateway was no issue where
in RHEl6.6 the web ui would not accept it. It is possible Redhat's IPA is not
compatible with packetfence and/or it is something else, I do not know but
that's behind me now as on Debian it works.
What I am trying to understand next is the complex web ui and to configure it
for inline mode and later vlan. I actually do not know what to do next.
eth1 is the wifi packetfence will manage and eth0 is the wired ethernet into
our system that has the default route.
regards
Steven
________________________________
From: Durand fabrice <[email protected]>
Sent: Thursday, 26 March 2015 10:13 a.m.
To: [email protected]
Subject: Re: [PacketFence-users] inline manual / cli setip guide by example.
Hi Steven,
without more information i can't help you.
Can you give me information of what you are doing in the configurator (step by
step)
Also:
- the network you want to use for mgmt and for inline ?
- the pf.conf and networks.conf files.
- the result of ip addr and ip route
- the result of cat /proc/sys/net/ipv4/ip_forward
Also did you disabled selinux/apparmor ?
The last thing, you talk about changing the default gateway, the default one is
suppose to be the system defaultone so if you change it you probably break the
default route.
Regards
Fabrice
Le 2015-03-25 16:07, Steven Jones a écrit :
Hi,
it is only simple to do if you know the system, so far i am guessing on
multiple pages as there is no explanation, no process to follow. Sadly there
isnt anything of use on youtube or via google so far either.
Reading through copious posts on different sites its pretty clear others as
well as myself are finding the documentation is severely lacking. In fact
about all I can say is its close to the poorest I have seen.
regards
Steven
________________________________
From: Durand fabrice <[email protected]><mailto:[email protected]>
Sent: Tuesday, 24 March 2015 11:00 a.m.
To:
[email protected]<mailto:[email protected]>
Subject: Re: [PacketFence-users] inline manual / cli setip guide by example.
Hi Steven,
Inline setup is really simple to do.
In packetfence define a management interface and an inline interface
(Type:inline layer 2, DNS:8.8.8.8).
Also don't forget to enable ip_forward.
Now connect a laptop in the inline network and if you are unreg then you will
hit the portal. If your device is reg then packetfence will act as a gateway
and your traffic will use mgmt ip address to reach internet.
http://www.packetfence.org/downloads/PacketFence/doc/PacketFence_Administration_Guide-4.7.0.pdf
Regards
Fabrice
Le 2015-03-23 17:21, Steven Jones a écrit :
Hi,
Does anyone have a nice simple config howto via command line to set up packet
fence in inline mode?
I have eth0 as the default network and eth1 as the wifi network I want to
control/limit.
The web ui is simply un-usuable without more documentation explaining the
options so I need some manual configuration guide(s).
thanks
regards
Steven J
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
PacketFence-users mailing list
[email protected]<mailto:[email protected]><mailto:[email protected]><mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
PacketFence-users mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the
conversation now. http://goparallel.sourceforge.net/
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
