hi Antoine,
thank you for your help. I tried with the new profile and I can do machine
authentication now. But I have a problem, at the first step I do machine auth
to put the hosts on a dedicated VLAN that can see only active directory and
nothing more. At this step the user can authenticate on the machine or change
AD password and so on. But when the user is logged on I want put them on
another VLAN based on the role associated to the AD group? At the moment the
user is authenticated so I can see the node status registered to the user with
the correct role but no VLAN change is made. Is that possible?
Luca
Inviato da Outlook<http://aka.ms/weboutlook>
________________________________
Da: Antoine Amacher <[email protected]>
Inviato: lunedì 29 maggio 2017 17:55
A: [email protected]
Oggetto: Re: [PacketFence-users] mab+802.1x authentication
Hello Lucas,
To use MachineAuthentication, create an AD source like the one used for your
UserAuthentiction, replace the Username attribute: "sAMAccountName" by
"ServicePrincipalName". That will allow you to do MachineAuthentication. Make
sure to add this source on your connection profile.
If the machine is in the domain with a valid machine account then it will be
able to authenticate.
To properly test MachineAuthentication, make sure that it is allowed or
enforced in the 802.1x supplicant configuration.
Thanks
On 05/29/2017 11:34 AM, luca comes wrote:
Hi Pedro,
yes I think so but I don't understand how to do this. I need to do a new
connection profile for it? At the moment I have only one connection profile
other than the default that take care of users. I'm really confused.
Thanks
Luca
Inviato da Outlook<http://aka.ms/weboutlook>
________________________________
Da: Pedro Simões <[email protected]><mailto:[email protected]>
Inviato: lunedì 29 maggio 2017 17:06
A:
[email protected]<mailto:[email protected]>
Oggetto: Re: [PacketFence-users] mab+802.1x authentication
I think for that scenario you need to use machine authentication.
From: luca comes [mailto:[email protected]]
Sent: Monday, May 29, 2017 3:12 PM
To:
[email protected]<mailto:[email protected]>
Subject: [PacketFence-users] mab+802.1x authentication
Hi all,
I succesfully configured last release of PF with Cisco Catalyst 3750G to
perform 802.1x authentication over my AD Domain.
I'm studying the solution because the intention is to deploy it on all my sites
(more or less 15 sites and 1000 users). Actually the server is located on our
datacenter in out-of-band deployment and locally on my test site I've
configured registration and isolation VLAN even if they are not used in 802.1x
environment. The problem now is that I need to permit AD authentication on PC's
where credentials are not in client's cache but at the begininning neither IP
traffic nor DHCP is permitted so users can't access the network. I thought that
a solution could be perform to factor authentication so at the start of the
process I could use MAB authentication and put them on the registration VLAN
opened to access the AD. But then I need to do 802.1x user authentication
without pass through the registration portal, is that possible? Is there a
better way to deploy a solution like that?
Thank you in advance
Luca
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/packetfence-users
--
Antoine Amacher
[email protected]<mailto:[email protected]> ::
www.inverse.ca<http://www.inverse.ca>
+1.514.447.4918 x130 :: +1 (866) 353-6153 x130
Inverse inc. :: Leaders behind SOGo (www.sogo.nu<http://www.sogo.nu>) and
PacketFence (www.packetfence.org<http://www.packetfence.org>)
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
