These are my VM settings BTW. My sysadmin guys set it up for me. hardware http://imagehost.phoenix-nest.com/?di=14154117691214 network http://imagehost.phoenix-nest.com/?di=015411769415
Thanks! From: Durand fabrice <[email protected]> Sent: Thursday, November 01, 2018 8:50 PM To: Jessica Cohen <[email protected]>; [email protected] Subject: Re: [PacketFence-users] getting started - interface questions Ok so in this case if you lost the access then it mean that the default route is changed. check the default route before and after you play with the interfaces/vlan. Le 18-11-01 à 19 h 45, Jessica Cohen a écrit : Hi Fabrice, It's a single ethernet interface with all vlans tagged except vlan 50 which is untagged. I'm a network engineer so server stuff, especially VMware is a bit new to me. I appreciate the assistance. Jessica From: Durand fabrice via PacketFence-users <[email protected]><mailto:[email protected]> Sent: Thursday, November 01, 2018 6:40 PM To: [email protected]<mailto:[email protected]> Cc: Durand fabrice <[email protected]><mailto:[email protected]> Subject: Re: [PacketFence-users] getting started - interface questions Hello Jessica, it depend how you configure the esx, do you have a interface with all the vlan tagged (only eth0 in the virtual machine) or a virtual interface for each vlan (it appear eth0, eth1, eth2, ethx... on the vm). Based on that, then you will need to create a vlan on the eth0 interface or assign the correct interface as the management/registration/isolation. Regards Fabrice Le 18-10-30 à 14 h 42, Jessica Cohen via PacketFence-users a écrit : Can someone please explain how the interfaces work or provide a link that adequately describes them? After importing the OVA and starting the server, it gets an IP address from our dhcp server that's in vlan 50. All of our network devices management IPs are in vlan 49. When I add a new interface, assign an IP and vlan, I suddenly lose all connectivity to the server unless I access it from a machine that's on the 50 vlan. Why can't I access the server from other vlans? I noticed that it adds a subinterface on eth0 (i.e. eth0.49) but that shouldn't affect intervlan routing as long as a default gateway is provided right? Can someone help me get past this step? _______________________________________________ PacketFence-users mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
