Hello Jessica,

strange, the trunkport is tagged to the vlan 4095 so it's not a trunk port.

We suppose to have a native vlan (the mgmt network) and the other vlans tagged.

So in this configuration if you add a interface vlan on the interface eth0 (like eth0.51) it will not work.

IMO the better option is to add on the esx side an interface in the vlan 51 and attach it to the vm (it will be eth1 on centos).

Regards

Fabrice


Le 18-11-02 à 12 h 44, Jessica Cohen a écrit :

These are my VM settings BTW. My sysadmin guys set it up for me.

hardware

http://imagehost.phoenix-nest.com/?di=14154117691214

network

http://imagehost.phoenix-nest.com/?di=015411769415

Thanks!

*From:* Durand fabrice <[email protected]>
*Sent:* Thursday, November 01, 2018 8:50 PM
*To:* Jessica Cohen <[email protected]>; [email protected]
*Subject:* Re: [PacketFence-users] getting started - interface questions

Ok so in this case if you lost the access then it mean that the default route is changed.

check the default route before and after you play with the interfaces/vlan.

Le 18-11-01 à 19 h 45, Jessica Cohen a écrit :

    Hi Fabrice,

    It’s a single ethernet interface with all vlans tagged except vlan
    50 which is untagged. I’m a network engineer so server stuff,
    especially VMware is a bit new to me. I appreciate the assistance.

    Jessica

    *From:* Durand fabrice via PacketFence-users
    <[email protected]>
    <mailto:[email protected]>
    *Sent:* Thursday, November 01, 2018 6:40 PM
    *To:* [email protected]
    <mailto:[email protected]>
    *Cc:* Durand fabrice <[email protected]> <mailto:[email protected]>
    *Subject:* Re: [PacketFence-users] getting started - interface
    questions

    Hello Jessica,

    it depend how you configure the esx, do you have a interface with
    all the vlan tagged (only eth0 in the virtual machine) or a
    virtual interface for each vlan (it appear eth0, eth1, eth2,
    ethx... on the vm).

    Based on that, then you will need to create a vlan on the eth0
    interface or assign the correct interface as the
    management/registration/isolation.

    Regards

    Fabrice

    Le 18-10-30 à 14 h 42, Jessica Cohen via PacketFence-users a écrit :

        Can someone please explain how the interfaces work or provide
        a link that adequately describes them? After importing the OVA
        and starting the server, it gets an IP address from our dhcp
        server that’s in vlan 50. All of our network devices
        management IPs are in vlan 49. When I add a new interface,
        assign an IP and vlan, I suddenly lose all connectivity to the
        server unless I access it from a machine that’s on the 50
        vlan. Why can’t I access the server from other vlans? I
        noticed that it adds a subinterface on eth0 (i.e. eth0.49) but
        that shouldn’t affect intervlan routing as long as a default
        gateway is provided right? Can someone help me get past this step?





        _______________________________________________

        PacketFence-users mailing list

        [email protected]  
<mailto:[email protected]>

        https://lists.sourceforge.net/lists/listinfo/packetfence-users

_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to