I've been trying to get the ZEN deployment going for months now and have been 
failing miserably. I have a large network with 22 vlans. I've been trying to 
get this up with just a few vlans so I can test it.

Vlan 49 = network management - none
Vlan 50 = servers - management
Vlan 51 = user desktops - registration
Vlan 59 = guest network - isolated

I changed the vm port to just the vlan. The native vlan on the Cisco switch is 
50. It gets an IP via dhcp 192.168.55.155. I can access it via the web gui and 
start the configuration. My desktop PC is on vlan 51. When I add vlans, I add 
vlan 51 and set it to registration and I immediately lose connection. If I 
shutdown that interface, I'm able to access it again. Can someone define what 
the "management" interface used for? Is it just a single IP? I've been setting 
the dhcp IP on the 50 vlan to management but ultimately, I want to be able to 
control what devices go on the 50 vlan as well. Does the "management" IP need 
to be on a completely separate vlan from anything else? Also, Is there some 
reason I can't manage the vm on the 50 vlan from my desktop on the 51 vlan? Is 
it because I defined the 51 vlan as registration? Will I be able to connect to 
and manage the NAC on the 50 vlan from my desktop on the 51 vlan?

_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to