Hello Fabrice, The switches models are Fiberstore S5850-32SQ and Fiberstore S3900-48TS. I do not have at hand these switches, but there is a chance I will get some. When I get them, I will test the generic type.
Regards Adrian De: "packetfence-users" <[email protected]> À: "packetfence-users" <[email protected]> Cc: "Durand fabrice" <[email protected]> Envoyé: Mardi 19 Février 2019 03:17:19 Objet: Re: [PacketFence-users] Can't link PacketFence with AD Server. Hello Adrian, what is the switch model ? Also you can try the generic one. Regards Fabrice Le 19-02-18 à 03 h 52, Adrian Dessaigne via PacketFence-users a écrit : Hello Fabrice, I was given a cisco 2960 to bypass my issue. PacketFence is now set up and work has intended. It works very well. However, if I use a Switch which is not listed in the type of switch of packetfence, will it work just for 802.1X ? I have read that coding a new Perl module was required to add an unknown switch. Regards Adrian. De: "packetfence-users" [ mailto:[email protected] | <[email protected]> ] À: "packetfence-users" [ mailto:[email protected] | <[email protected]> ] Cc: "Durand fabrice" [ mailto:[email protected] | <[email protected]> ] Envoyé: Jeudi 14 Février 2019 03:13:47 Objet: Re: [PacketFence-users] Can't link PacketFence with AD Server. Hello Adrian, i will check tomorrow the patch i gave you to be sure that it apply correctly. Regards Fabrice Le 19-02-11 à 11 h 04, Adrian Dessaigne via PacketFence-users a écrit : BQ_BEGIN My bad, there is a difference, Here is the debbug on pastbin: The line 1749 tell the reason he got refused: &session-state:Module-Failure-Message := "Failed retrieving values required to evaluate condition" Regards Adrian ----- Mail original ----- De: "packetfence-users" [ mailto:[email protected] | <[email protected]> ] À: "packetfence-users" [ mailto:[email protected] | <[email protected]> ] Cc: "Durand fabrice" [ mailto:[email protected] | <[email protected]> ] Envoyé: Samedi 9 Février 2019 02:17:51 Objet: Re: [PacketFence-users] Can't link PacketFence with AD Server. Hello Adrian, i did the patch based on the devel branch. Here a new one based on packetfence 8.3. Regards Fabrice _______________________________________________ PacketFence-users mailing list [ mailto:[email protected] | [email protected] ] [ https://lists.sourceforge.net/lists/listinfo/packetfence-users | https://lists.sourceforge.net/lists/listinfo/packetfence-users ] _______________________________________________ PacketFence-users mailing list [ mailto:[email protected] | [email protected] ] [ https://lists.sourceforge.net/lists/listinfo/packetfence-users | https://lists.sourceforge.net/lists/listinfo/packetfence-users ] _______________________________________________ PacketFence-users mailing list [ mailto:[email protected] | [email protected] ] [ https://lists.sourceforge.net/lists/listinfo/packetfence-users | https://lists.sourceforge.net/lists/listinfo/packetfence-users ] BQ_END _______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
