Hello Adrian,
it should be ok, but you will probably have to do the deauth with snmp.
Regards
Fabrice
Le 19-02-19 à 03 h 16, Adrian Dessaigne via PacketFence-users a écrit :
Hello Fabrice,
The switches models are Fiberstore S5850-32SQ and Fiberstore S3900-48TS.
I do not have at hand these switches, but there is a chance I will get
some. When I get them, I will test the generic type.
Regards
Adrian
------------------------------------------------------------------------
*De: *"packetfence-users" <[email protected]>
*À: *"packetfence-users" <[email protected]>
*Cc: *"Durand fabrice" <[email protected]>
*Envoyé: *Mardi 19 Février 2019 03:17:19
*Objet: *Re: [PacketFence-users] Can't link PacketFence with AD Server.
Hello Adrian,
what is the switch model ?
Also you can try the generic one.
Regards
Fabrice
Le 19-02-18 à 03 h 52, Adrian Dessaigne via PacketFence-users a écrit :
Hello Fabrice,
I was given a cisco 2960 to bypass my issue. PacketFence is now
set up and work has intended. It works very well.
However, if I use a Switch which is not listed in the type of
switch of packetfence, will it work just for 802.1X ? I have read
that coding a new Perl module was required to add an unknown switch.
Regards
Adrian.
------------------------------------------------------------------------
*De: *"packetfence-users" <[email protected]>
*À: *"packetfence-users" <[email protected]>
*Cc: *"Durand fabrice" <[email protected]>
*Envoyé: *Jeudi 14 Février 2019 03:13:47
*Objet: *Re: [PacketFence-users] Can't link PacketFence with AD
Server.
Hello Adrian,
i will check tomorrow the patch i gave you to be sure that it
apply correctly.
Regards
Fabrice
Le 19-02-11 à 11 h 04, Adrian Dessaigne via PacketFence-users a
écrit :
My bad, there is a difference,
Here is the debbug on pastbin:
The line 1749 tell the reason he got refused:
&session-state:Module-Failure-Message := "Failed retrieving
values required to evaluate condition"
Regards
Adrian
----- Mail original -----
De: "packetfence-users" <[email protected]>
À: "packetfence-users" <[email protected]>
Cc: "Durand fabrice" <[email protected]>
Envoyé: Samedi 9 Février 2019 02:17:51
Objet: Re: [PacketFence-users] Can't link PacketFence with AD
Server.
Hello Adrian,
i did the patch based on the devel branch.
Here a new one based on packetfence 8.3.
Regards
Fabrice
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
