Hello, You can see in the documentation the routed network for help you. In my opinion, you need to create all vlan on all switch with helper-adress on isolation and register vlan. You need also to create the registration and isolation vlan on the packetfence's switch to listen the dhcp. Regards
Le vendredi 22 février 2019, Andrea Lenarduzzi via PacketFence-users < [email protected]> a écrit : > Hi, this is my actual network infrastructure: > > MPLS (1 master location, 23 other locations) > > Master is star center to go out to internet for all locations > > In Master there are routing vlan,server vlan, dmz,3/4 separated vlan,voip > vlan > > Example Location 2 there is a simple switch (1 subnet 192.168.111.0/24) > Example Location 3 there is a simple switch (1 subnet 192.168.112.0/24) > Example Location 4 there is a simple switch (1 subnet 192.168.113.0/24) > Example Location 5 there is a simple switch (1 subnet 192.168.114.0/24) > ecc ecc > In no master locations voip phone are on the same pc subnet. > > I want build Packetfence to allocate ip/subnets by roles (locations > role,users role,wifi access ecc ecc) > > Packetfence now is a VM on ServerVLAN with 1 eth > > How I have set Managment,registrations,isolations,portal settings? > > Thanks > Andrea >
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
